[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (262.2, 207.5) = 17 30 49.53 -21 34 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.0 +/- 24.7
  Background counts = 32.1
  Rate = 0.02 +/- 0.001

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 7.10'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Sat Jul 14 23:02:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.737
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.98"
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Jul 15 09:16:45 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Jul 15 17:36:09 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.787269 pixels away
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 04:03:19 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Mon Jul 16 04:03:19 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.737
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.98"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jul 16 12:06:29 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Jul 16 12:06:30 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jul 16 12:06:30 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jul 16 12:06:30 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jul 23 13:48:42 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.464139 pixels away
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(22764.844543, 18003.901764, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (225, 170) - (300, 245)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(22764.844543, 18003.901764, 1087.500000, 2175.000000, X, Y) && !ellipse(26158.950000, 25511.772000, 6872.832198, 6872.832198, 0.000000, X, Y) && !ellipse(24261.714400, 23499.824000, 3623.808104, 3623.808104, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12.gif
[Wed Jul 25 11:18:19 2012] Mean detx,y = (6183.82, 2430.34) 
[Wed Jul 25 11:18:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 11:18:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 11:18:52 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Jul 25 11:18:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jul 26 10:06:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 10:06:33 2012] rmf not generated due to insufficient counts
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul 27 04:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:52 2012] Using photon index=1.80, rate=0.0188, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src12.arf
[Fri Jul 27 04:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:52 2012] Updating source flux to 3.3e-13
[Fri Jul 27 04:31:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting