[Sat Jul 14 18:27:47 2012] Detection parameters:
  Position = (184.9, 326.8) = 17 31 13.61 -21 25 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.0 +/- 29.8
  Background counts = 20.1
  Rate = 0.02 +/- 0.001

[Sat Jul 14 18:27:48 2012] Off-axis axis estimate = 8.49'
[Sat Jul 14 23:02:16 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 23:02:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 23:02:16 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Sat Jul 14 23:02:16 2012] source mask rpix=2.5, npix_max = 34, mask sum = 34, frac = 0.975
[Sat Jul 14 23:02:16 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.67"
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11.csv
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 15 09:16:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11.csv
[Sun Jul 15 09:16:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 15 09:16:45 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 15 09:16:45 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Jul 15 17:36:09 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.811544 pixels away
[Sun Jul 15 17:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Jul 15 17:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 15 17:36:09 2012] Assessing source extent using major
[Sun Jul 15 17:36:09 2012] Source does appear to be extended
[Sun Jul 15 17:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 04:03:19 2012] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 04:03:19 2012] Initial guess for spatial extent in simple fitting = 10.67"
[Mon Jul 16 04:03:19 2012] source mask rpix=2.5, npix_max = 34, mask sum = 34, frac = 0.975
[Mon Jul 16 04:03:19 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.67"
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11.csv
[Mon Jul 16 12:06:29 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jul 16 12:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11.csv
[Mon Jul 16 12:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 12:06:30 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jul 16 12:06:30 2012] fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jul 16 12:06:30 2012] Fit fullrun_mos1_xmm0084100101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jul 23 13:48:42 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.153448 pixels away
[Mon Jul 23 13:48:42 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 13:48:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 13:48:42 2012] Assessing source extent using major
[Mon Jul 23 13:48:42 2012] Source does appear to be extended
[Mon Jul 23 13:48:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 09:55:25 2012] XMMSAS src. selection expression = ellipse(16036.708252, 28384.723816, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing source region out to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10_src.reg
[Wed Jul 25 09:55:25 2012] Extracting stamp from image fullrun_mos1_xmm0084100101_pi300-10000_cl_sm2.00.img.gz, (147, 289) - (222, 364)
[Wed Jul 25 09:55:25 2012] XMMSAS bgd. selection expression = annulus(16036.708252, 28384.723816, 1087.500000, 2175.000000, X, Y)
[Wed Jul 25 09:55:25 2012] Writing fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10.gif
[Wed Jul 25 11:19:04 2012] Mean detx,y = (-4698.25, 8276.77) 
[Wed Jul 25 11:19:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 11:19:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 11:19:30 2012] Setting source spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jul 25 11:19:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Jul 26 10:06:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 26 10:06:59 2012] rmf not generated due to insufficient counts
[Fri Jul 27 04:31:51 2012] Updating aperture counts using extracted products
[Fri Jul 27 04:31:51 2012] Error reading totcts from fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jul 27 04:31:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 04:31:52 2012] Using photon index=1.80, rate=0.0175, arf fullrun_mos1_xmm0084100101_pi300-10000_pass1_cl_src10.arf
[Fri Jul 27 04:31:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 04:31:52 2012] Updating source flux to 3.9e-13
[Fri Jul 27 04:31:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting