Processing completion:

Field: xmm0084030101

Detector Exposure (Original/High-E Flare Cleaned/Low-E Cleaned) Image binning Plate scale ("/pixel) Bgd. level (orig/High-E flare cleaned/cleaned, counts/sq. arcmin/s) GTI file Bgd. light curves Roll angle CCD counts Extra info
mos1 42617 | 42617 | 42617 1.00 4.35 0/0 Yes orig clean ccd1:37497 ccd2:10623 ccd3:13591 ccd4:11729 ccd5:11606 ccd6:12888 ccd7:10470 filter=Thin1
mos2 42612 | 42578 | 42577 1.00 4.35 0/0 Yes orig clean ccd1:38279 ccd2:11335 ccd3:11919 ccd4:9974 ccd5:11026 ccd6:13525 ccd7:11513 filter=Thin1
pn 242 | 242 | 241 1.00 4.35 0/0 Yes orig clean ccd4:376 ccd5:136 ccd6:100 filter=Thin1

Source List (gives positions and fluxes and links for detailed analyses)

110 source(s) in memory
Iteration: 2
|mos1 |mos2 |pn |
init Complete
acquire Complete
reduce Complete
detect Complete
timeclean Complete
simplespatial Complete
assess Complete
extract Complete
reassess Complete
spectral Complete
temporal Complete
spatial Complete
correl Skip
sim Skip
qlook Skip
xray image
skyview image

Xray image, smoothed with a 2 pixel gaussian

Skyview image(s) of FOV (with X-ray sources marked)

Color code (marks may only appear on detector-specific images for multi-detector missions, see links above): green = point source, red = problematic/questionable source, blue = extended source, magenta = asymmetric source (may be extended), cyan = estimated detector boundary, purple = "Region of Interest" (if set)

Python version = 2.5.4 (r254:67916, Aug 14 2009, 18:07:15) [GCC 4.1.1 20070105 (Red Hat 4.1.1-52)]
Headas version = 6.11
XAssist version = 1.000
SAS version = xmmsas_20110223_1801-11.0.0
numpy version = 1.3.0
Pyfits version = 2.1.1
XAssist originally started on this data set at Wed Apr 11 06:16:38 2012
This data set was last accessed on Wed Apr 11 06:16:38 2012
Current user = xassist on x3.localdomain
Number of fields in memory = 1
Current field being processed = xmm0084030101
Position of field target = 12 39 59.40 -11 37 23.0
Current telescope = xmm
Current detector = all
Processing mode = proc
Processing status = OK
Detection method = eboxdetect
Batch processing enabled
Place data, logs, etc. in field subdirectories
Image analysis will be over range of allowed energies
Will analyze each ccd separately

Log files: processing messages |error messages |all messages (very detailed) |source logs