[Wed Apr 11 06:17:30 2012] Detection parameters:
  Position = (283.2, 275.9) = 12 40 2.54 -11 37 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.3 +/- 26.7
  Background counts = 39.3
  Rate = 0.01 +/- 0.0007

[Wed Apr 11 06:17:31 2012] Off-axis axis estimate = 1.97'
[Wed Apr 11 06:17:54 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:17:54 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Apr 11 06:17:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.772
[Wed Apr 11 06:17:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.42"
[Wed Apr 11 06:17:54 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Apr 11 06:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:17:54 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Apr 11 06:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:17:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:17:55 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:18:13 2012] Warning, spatial fit 3 centroid is now closest to src. 33
[Wed Apr 11 06:18:13 2012] Source 6 is offset by -8.794088 and -0.145498 pixels which is larger than
2 X fitted extent = 2.131136 x 2.131136, not incorporating fit results
[Wed Apr 11 06:18:13 2012] Source 6 is offset by 8.008119 and 2.361675 pixels which is larger than
2 X fitted extent = 2.335048 x 2.335048, not incorporating fit results
[Wed Apr 11 06:18:13 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:13 2012] Assessing source extent using major
[Wed Apr 11 06:18:13 2012] Source does appear to be extended
[Wed Apr 11 06:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:18:13 2012] Source is confused with source 33
[Wed Apr 11 06:18:26 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:18:26 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Wed Apr 11 06:18:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.772
[Wed Apr 11 06:18:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.42"
[Wed Apr 11 06:18:27 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Apr 11 06:18:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:18:27 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Apr 11 06:18:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:18:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:18:30 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Apr 11 06:18:30 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:18:30 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:18:46 2012] Source 6 is offset by -6.595697 and -0.451948 pixels which is larger than
2 X fitted extent = 3.302800 x 3.302800, not incorporating fit results
[Wed Apr 11 06:18:46 2012] Source 6 is offset by -8.699030 and -0.145498 pixels which is larger than
2 X fitted extent = 3.625655 x 3.625655, not incorporating fit results
[Wed Apr 11 06:18:46 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:46 2012] Assessing source extent using major
[Wed Apr 11 06:18:46 2012] Source does appear to be extended
[Wed Apr 11 06:18:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:19:04 2012] XMMSAS src. selection expression = ellipse(24591.884369, 23952.311707, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Apr 11 06:19:04 2012] Not overwriting source region fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src.reg
[Wed Apr 11 06:19:04 2012] Extracting stamp from image fullrun_mos2_xmm0084030101_pi300-10000_cl_sm2.00.img.gz, (246, 238) - (321, 313)
[Wed Apr 11 06:19:04 2012] XMMSAS bgd. selection expression = annulus(24591.884369, 23952.311707, 1087.500000, 2175.000000, X, Y) && !ellipse(25486.550200, 23929.331400, 478.802414, 478.802414, 0.000000, X, Y) && !ellipse(25405.293400, 26407.494000, 1024.360029, 574.323217, 154.285100, X, Y) && !ellipse(22307.259140, 24786.178600, 555.005616, 409.127212, 206.760878, X, Y) && !ellipse(25583.447540, 22757.129028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.383300, 25132.985400, 404.312812, 404.312812, 0.000000, X, Y) && !ellipse(23979.290000, 23733.992000, 1186.416034, 1186.416034, 0.000000, X, Y) && !ellipse(24743.452026, 23278.720154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.018660, 22198.537000, 322.683101, 322.683101, 0.000000, X, Y) && !ellipse(23755.297913, 26818.989319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.680511, 21197.408173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.045868, 24838.985291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.274000, 25200.752000, 1103.768032, 1103.768032, 0.000000, X, Y) && !ellipse(23262.720000, 23286.972000, 575.421617, 575.421617, 0.000000, X, Y)
[Wed Apr 11 06:19:04 2012] Writing fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6.gif
[Wed Apr 11 06:19:14 2012] ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Apr 11 06:19:14 2012] Mean detx,y = (-606.96, -288.86) 
[Wed Apr 11 06:19:14 2012] ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Apr 11 06:19:14 2012] ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Apr 11 06:19:14 2012] Setting source spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Apr 11 06:19:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Apr 11 06:19:14 2012] ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Apr 11 06:19:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Apr 11 06:19:26 2012] rmf not generated due to insufficient counts
[Wed Apr 11 06:19:26 2012] fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Wed Apr 11 06:19:56 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:19:56 2012] Error reading totcts from fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Apr 11 06:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:19:57 2012] Using photon index=1.80, rate=0.0104, arf fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src6.arf
[Wed Apr 11 06:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:19:57 2012] Updating source flux to 1e-13
[Wed Apr 11 06:20:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting