[Wed Apr 11 06:17:31 2012] Detection parameters:
  Position = (300.8, 285.7) = 12 39 57.32 -11 36 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.3 +/- 16.6
  Background counts = 38.6
  Rate = 0.002 +/- 0.0004

[Wed Apr 11 06:17:31 2012] Off-axis axis estimate = 0.94'
[Wed Apr 11 06:17:54 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:17:54 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Apr 11 06:17:54 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Wed Apr 11 06:17:54 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 6.90"
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37.ximg exists
[Wed Apr 11 06:17:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37.csv
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Apr 11 06:17:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37.csv
[Wed Apr 11 06:17:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Apr 11 06:17:55 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Apr 11 06:18:13 2012] Spatial fit model total counts = 1812.670000, observed total counts = 1790.000000
[Wed Apr 11 06:18:13 2012] Offset between fit and detection position for source 49 = 7.331147 pixels
[Wed Apr 11 06:18:13 2012] 1536.715000 total counts/ 1168.070000 bgd. counts: snr = 10.786335
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 7.331147 pixels
  Position = (306.6, 290.2) = 12 39 55.62 -11 36 18.5
  Extent = 13.8 (13.6-27.6)", rotation angle = 0
  Source counts = 368.6 +/- 39.2
  Background counts = 1168.1
  Rate = 0.009 +/- 0.0009
[Wed Apr 11 06:18:13 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:13 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:18:13 2012] Source does appear to be extended
[Wed Apr 11 06:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:18:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:18:27 2012] Initial guess for spatial extent in simple fitting = 13.80"
[Wed Apr 11 06:18:27 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.909
[Wed Apr 11 06:18:27 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 13.80"
[Wed Apr 11 06:18:30 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37.ximg exists
[Wed Apr 11 06:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37.csv
[Wed Apr 11 06:18:30 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37_1.ximg exists
[Wed Apr 11 06:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37.csv
[Wed Apr 11 06:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:18:31 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Wed Apr 11 06:18:31 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Wed Apr 11 06:18:31 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Wed Apr 11 06:18:46 2012] Warning, spatial fit 37 centroid is now closest to src. 45
[Wed Apr 11 06:18:46 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:46 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:18:46 2012] Source does appear to be extended
[Wed Apr 11 06:18:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:19:05 2012] XMMSAS src. selection expression = ellipse(26627.274000, 25200.752000, 827.826024, 827.826024, 0.000000, X, Y)
[Wed Apr 11 06:19:05 2012] Not overwriting source region fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src.reg
[Wed Apr 11 06:19:05 2012] Extracting stamp from image fullrun_mos2_xmm0084030101_pi300-10000_cl_sm2.00.img.gz, (259, 243) - (354, 338)
[Wed Apr 11 06:19:05 2012] XMMSAS bgd. selection expression = annulus(26627.274000, 25200.752000, 1379.710040, 2759.420079, X, Y) && !ellipse(25486.550200, 23929.331400, 478.802414, 478.802414, 0.000000, X, Y) && !ellipse(29673.387421, 22200.827377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24591.884369, 23952.311707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28677.149487, 24124.121997, 439.064797, 361.664891, 128.016996, X, Y) && !ellipse(25405.293400, 26407.494000, 1024.360029, 574.323217, 154.285100, X, Y) && !ellipse(29680.128540, 25554.170532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.674800, 22725.015600, 658.284819, 409.392012, 348.896000, X, Y) && !ellipse(25583.447540, 22757.129028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.383300, 25132.985400, 404.312812, 404.312812, 0.000000, X, Y) && !ellipse(23979.290000, 23733.992000, 1186.416034, 1186.416034, 0.000000, X, Y) && !ellipse(24743.452026, 23278.720154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.018660, 22198.537000, 322.683101, 322.683101, 0.000000, X, Y) && !ellipse(23755.297913, 26818.989319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.045868, 24838.985291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26555.123640, 27030.021000, 272.234408, 272.234408, 0.000000, X, Y) && !ellipse(28115.790588, 21715.270309, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Apr 11 06:19:05 2012] Writing fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49.gif
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src.evt and ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_bgd.evt exist, delete to re-create
[Wed Apr 11 06:19:15 2012] Mean detx,y = (1416.98, -593.57) 
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src.img and ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_bgd.img exist, delete to re-create
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src_b10.pi.gz and ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_bgd.pi exist, delete to re-create
[Wed Apr 11 06:19:15 2012] Setting source spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Apr 11 06:19:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src.lc and ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_bgd.lc exist, delete to re-create
[Wed Apr 11 06:19:26 2012] fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49.rmf exists, delete to re-create
[Wed Apr 11 06:19:26 2012] fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49.arf exists, delete to re-create
[Wed Apr 11 06:19:57 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:19:57 2012] Error reading totcts from fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Apr 11 06:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:19:57 2012] Using photon index=1.80, rate=0.00866, arf fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src49.arf
[Wed Apr 11 06:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:19:57 2012] Updating source flux to 9e-14