[Wed Apr 11 06:17:31 2012] Detection parameters:
  Position = (275.2, 273.2) = 12 40 4.91 -11 37 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.0 +/- 18.5
  Background counts = 38.2
  Rate = 0.004 +/- 0.0005

[Wed Apr 11 06:17:31 2012] Off-axis axis estimate = 2.49'
[Wed Apr 11 06:17:54 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:17:54 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Wed Apr 11 06:17:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.781
[Wed Apr 11 06:17:54 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.67"
[Wed Apr 11 06:17:54 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19.ximg exists
[Wed Apr 11 06:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19.csv
[Wed Apr 11 06:17:54 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Apr 11 06:17:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19.csv
[Wed Apr 11 06:17:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Apr 11 06:17:55 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Apr 11 06:17:55 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Wed Apr 11 06:18:13 2012] Spatial fit model total counts = 2255.880000, observed total counts = 2251.000000
[Wed Apr 11 06:18:13 2012] Offset between fit and detection position for source 33 = 0.972355 pixels
[Wed Apr 11 06:18:13 2012] Warning, changing simple spatial fit ID from 19 to 3
[Wed Apr 11 06:18:13 2012] 1953.160000 total counts/ 1665.020000 bgd. counts: snr = 7.061449
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.972355 pixels
  Position = (276.2, 273.4) = 12 40 4.63 -11 37 31.9
  Extent = 14.8 (14.8-29.7)", rotation angle = 0
  Source counts = 288.1 +/- 44.2
  Background counts = 1665.0
  Rate = 0.007 +/- 0.001
[Wed Apr 11 06:18:13 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:13 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:18:13 2012] Source does appear to be extended
[Wed Apr 11 06:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:18:13 2012] Source is confused with source 6
[Wed Apr 11 06:18:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:18:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:18:26 2012] Initial guess for spatial extent in simple fitting = 14.83"
[Wed Apr 11 06:18:26 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.047
[Wed Apr 11 06:18:26 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.83"
[Wed Apr 11 06:18:28 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Apr 11 06:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 06:18:28 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Apr 11 06:18:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19.csv
[Wed Apr 11 06:18:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:18:31 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Apr 11 06:18:31 2012] fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Apr 11 06:18:31 2012] Fit fullrun_mos2_xmm0084030101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Apr 11 06:18:46 2012] Warning, spatial fit 19 centroid is now closest to src. 50
[Wed Apr 11 06:18:46 2012] Source 33 is offset by 2.567448 and -1.150897 pixels which is larger than
2 X fitted extent = 1.929890 x 1.929890, not incorporating fit results
[Wed Apr 11 06:18:46 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:18:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:18:46 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:18:46 2012] Source does appear to be extended
[Wed Apr 11 06:18:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:19:04 2012] XMMSAS src. selection expression = ellipse(23979.290000, 23733.992000, 889.812026, 889.812026, 0.000000, X, Y)
[Wed Apr 11 06:19:04 2012] Not overwriting source region fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src.reg
[Wed Apr 11 06:19:04 2012] Extracting stamp from image fullrun_mos2_xmm0084030101_pi300-10000_cl_sm2.00.img.gz, (225, 222) - (327, 325)
[Wed Apr 11 06:19:04 2012] XMMSAS bgd. selection expression = annulus(23979.290000, 23733.992000, 1483.020043, 2966.040085, X, Y) && !ellipse(25486.550200, 23929.331400, 478.802414, 478.802414, 0.000000, X, Y) && !ellipse(24591.884369, 23952.311707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25405.293400, 26407.494000, 1024.360029, 574.323217, 154.285100, X, Y) && !ellipse(22307.259140, 24786.178600, 555.005616, 409.127212, 206.760878, X, Y) && !ellipse(25583.447540, 22757.129028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25358.383300, 25132.985400, 404.312812, 404.312812, 0.000000, X, Y) && !ellipse(24743.452026, 23278.720154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26672.018660, 22198.537000, 322.683101, 322.683101, 0.000000, X, Y) && !ellipse(23755.297913, 26818.989319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.680511, 21197.408173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.045868, 24838.985291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.274000, 25200.752000, 1103.768032, 1103.768032, 0.000000, X, Y) && !ellipse(23262.720000, 23286.972000, 575.421617, 575.421617, 0.000000, X, Y)
[Wed Apr 11 06:19:04 2012] Writing fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33.gif
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0084030101/products/events/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Wed Apr 11 06:19:15 2012] Mean detx,y = (-1269.70, -407.12) 
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src.img and ../../xmm0084030101/products/images/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0084030101/products/spectra/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Wed Apr 11 06:19:15 2012] Setting source spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Apr 11 06:19:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Apr 11 06:19:15 2012] ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0084030101/products/lightcurves/fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Wed Apr 11 06:19:26 2012] fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33.rmf exists, delete to re-create
[Wed Apr 11 06:19:26 2012] fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Wed Apr 11 06:19:56 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:19:56 2012] Error reading totcts from fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed Apr 11 06:19:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:19:57 2012] Using photon index=1.80, rate=0.00677, arf fullrun_mos2_xmm0084030101_pi300-10000_pass1_cl_src33.arf
[Wed Apr 11 06:19:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:19:57 2012] Updating source flux to 6.1e-14
[Wed Apr 11 06:20:00 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Wed Apr 11 06:20:00 2012] Flag c found in src. 33 procflags, skipping spectral fitting