[Sat Dec 17 22:31:02 2011] Detection parameters:
  Position = (281.5, 192.9) = 18 39 57.94 4 55 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1619.0 +/- 261.1
  Background counts = 121.5
  Rate = 0.1 +/- 0.02

[Sat Dec 17 22:31:02 2011] Off-axis axis estimate = 7.75'
[Sun Dec 18 01:35:41 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 01:35:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 01:35:41 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Dec 18 01:35:41 2011] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.608
[Sun Dec 18 01:35:41 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.30"
[Sun Dec 18 04:39:42 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 04:39:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 04:39:42 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 04:39:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 04:39:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 04:39:43 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 04:39:43 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 04:39:43 2011] Fit fullrun_mos2_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 04:40:15 2011] Source 3 is offset by 3.261855 and -0.266446 pixels which is larger than
2 X fitted extent = 2.915058 x 2.915058, not incorporating fit results
[Sun Dec 18 04:40:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:40:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:40:15 2011] Assessing source extent using major
[Sun Dec 18 04:40:15 2011] Source does appear to be extended
[Sun Dec 18 04:40:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 04:40:15 2011] Source is confused with source 28
[Sun Dec 18 07:58:02 2011] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 07:58:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 18 07:58:02 2011] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Dec 18 07:58:02 2011] source mask rpix=2.4, npix_max = 32, mask sum = 20, frac = 0.608
[Sun Dec 18 07:58:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.30"
[Sun Dec 18 10:23:58 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 10:23:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 10:23:58 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 10:23:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 10:23:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 10:23:58 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 10:23:58 2011] fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 10:23:58 2011] Fit fullrun_mos2_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Dec 18 10:24:25 2011] Source 3 is offset by 3.284751 and -0.149503 pixels which is larger than
2 X fitted extent = 2.997218 x 2.997218, not incorporating fit results
[Sun Dec 18 10:24:25 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.982138 pixels away
[Sun Dec 18 10:24:25 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.287683 pixels away
[Sun Dec 18 10:24:25 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 10:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 10:24:25 2011] Assessing source extent using major
[Sun Dec 18 10:24:25 2011] Source does appear to be extended
[Sun Dec 18 10:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 12:50:12 2011] Counts = 1618.996338, rescaling region sizes by 2.000000
[Sun Dec 18 12:50:12 2011] XMMSAS src. selection expression = ellipse(24441.997345, 16737.184631, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Dec 18 12:50:12 2011] Writing source region out to fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3_src.reg
[Sun Dec 18 12:50:12 2011] Extracting stamp from image fullrun_mos2_xmm0084020601_pi300-10000_cl_sm2.00.img.gz, (206, 118) - (356, 268)
[Sun Dec 18 12:50:12 2011] XMMSAS bgd. selection expression = annulus(24441.997345, 16737.184631, 4350.000000, 8700.000000, X, Y) && !ellipse(24381.746000, 17519.125800, 1608.608046, 669.460019, 348.479800, X, Y) && !ellipse(24068.894043, 13522.120712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24061.082600, 15702.854000, 1205.312035, 1205.312035, 0.000000, X, Y) && !ellipse(24058.515533, 12041.098907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23844.068800, 9574.164400, 967.304028, 967.304028, 0.000000, X, Y) && !ellipse(24096.583344, 14895.402756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24048.126404, 12742.561630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23899.593445, 11270.069107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.858429, 9085.437325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.239380, 8398.037628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23890.322083, 7818.838341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24164.436800, 15121.118000, 1672.088048, 1672.088048, 0.000000, X, Y) && !ellipse(17773.605800, 25101.153200, 1584.784046, 837.312024, 276.934200, X, Y) && !ellipse(31402.002655, 22605.601196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18004.958000, 26156.646000, 1598.472046, 1598.472046, 0.000000, X, Y)
[Sun Dec 18 12:50:12 2011] Writing fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3.gif
[Sun Dec 18 12:50:22 2011] Mean detx,y = (106.28, 7642.13) 
[Sun Dec 18 12:50:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 12:52:44 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 12:52:45 2011] Setting source spectrum file to fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 12:52:45 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Dec 18 13:10:19 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 13:10:19 2011] rmf not generated due to insufficient counts
[Sun Dec 18 14:19:44 2011] Updating aperture counts using extracted products
[Sun Dec 18 14:19:44 2011] Error reading totcts from fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Dec 18 14:19:46 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 14:19:46 2011] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3.arf
[Sun Dec 18 14:19:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 14:19:46 2011] Updating source flux to 1.9e-11
[Sun Dec 18 14:24:28 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Dec 18 14:27:49 2011] xmm0084020601/analysis//spectral/fullrun_mos2_xmm0084020601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete