[Sat Dec 17 22:30:28 2011] Detection parameters:
  Position = (205.4, 301.0) = 18 40 20.08 5 3 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.2 +/- 17.4
  Background counts = 139.2
  Rate = 0.007 +/- 0.001

[Sat Dec 17 22:30:29 2011] Off-axis axis estimate = 6.74'
[Sat Dec 17 22:32:58 2011] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 22:32:58 2011] Initial guess for spatial extent in simple fitting = 9.80"
[Sat Dec 17 22:32:58 2011] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.792
[Sat Dec 17 22:32:58 2011] Giving source the simple spatial ID 44 for pass 0, mean size = 9.80"
[Sun Dec 18 01:35:40 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44.ximg exists
[Sun Dec 18 01:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44.csv
[Sun Dec 18 01:35:40 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Dec 18 01:35:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44.csv
[Sun Dec 18 01:35:40 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 01:35:41 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Dec 18 01:35:41 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Dec 18 01:35:41 2011] Fit fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Sun Dec 18 04:40:03 2011] Source 44 is offset by -3.737740 and -5.164757 pixels which is larger than
2 X fitted extent = 1.147517 x 1.147517, not incorporating fit results
[Sun Dec 18 04:40:03 2011] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 13.167508 pixels away
[Sun Dec 18 04:40:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:40:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:40:03 2011] Assessing source extent using major
[Sun Dec 18 04:40:03 2011] Source does appear to be extended
[Sun Dec 18 04:40:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 04:40:03 2011] Source is confused with source 35
[Sun Dec 18 04:40:29 2011] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 04:40:29 2011] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Dec 18 04:40:29 2011] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.792
[Sun Dec 18 04:40:29 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 9.80"
[Sun Dec 18 07:58:01 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37.ximg exists
[Sun Dec 18 07:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37.csv
[Sun Dec 18 07:58:01 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun Dec 18 07:58:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37.csv
[Sun Dec 18 07:58:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:58:02 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun Dec 18 07:58:02 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun Dec 18 07:58:02 2011] Fit fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun Dec 18 10:24:15 2011] Source 44 is offset by -3.737740 and -5.164757 pixels which is larger than
2 X fitted extent = 1.147517 x 1.147517, not incorporating fit results
[Sun Dec 18 10:24:15 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.742588 pixels away
[Sun Dec 18 10:24:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 10:24:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 10:24:15 2011] Assessing source extent using major
[Sun Dec 18 10:24:15 2011] Source does appear to be extended
[Sun Dec 18 10:24:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 10:24:40 2011] XMMSAS src. selection expression = ellipse(17824.988632, 26139.838135, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Dec 18 10:24:40 2011] Writing source region out to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44_src.reg
[Sun Dec 18 10:24:40 2011] Extracting stamp from image fullrun_mos1_xmm0084020601_pi300-10000_cl_sm2.00.img.gz, (168, 264) - (243, 339)
[Sun Dec 18 10:24:40 2011] XMMSAS bgd. selection expression = annulus(17824.988632, 26139.838135, 1087.500000, 2175.000000, X, Y) && !ellipse(17784.630859, 24343.540894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17829.997345, 23602.230164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17385.007797, 25777.697449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.150400, 27274.490000, 610.106418, 610.106418, 0.000000, X, Y) && !ellipse(17601.422000, 27161.042000, 1613.736046, 1613.736046, 0.000000, X, Y) && !ellipse(17544.154600, 22627.400000, 1640.656047, 1640.656047, 0.000000, X, Y)
[Sun Dec 18 10:24:40 2011] Writing fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44.gif
[Sun Dec 18 11:01:02 2011] Mean detx,y = (-1272.89, 6910.01) 
[Sun Dec 18 11:01:03 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 11:01:27 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 11:01:27 2011] Setting source spectrum file to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Dec 18 11:01:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sun Dec 18 12:35:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Dec 18 12:35:43 2011] rmf not generated due to insufficient counts
[Sun Dec 18 14:19:42 2011] Updating aperture counts using extracted products
[Sun Dec 18 14:19:42 2011] Error reading totcts from fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sun Dec 18 14:19:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 14:19:44 2011] Using photon index=1.80, rate=0.00711, arf fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src44.arf
[Sun Dec 18 14:19:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 14:19:44 2011] Updating source flux to 1.2e-13
[Sun Dec 18 14:19:49 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting