[Sat Dec 17 22:30:27 2011] Detection parameters:
  Position = (275.7, 103.1) = 18 39 59.63 4 49 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 16.2
  Background counts = 32.7
  Rate = 0.005 +/- 0.0008

[Sat Dec 17 22:30:29 2011] Off-axis axis estimate = 14.26'
[Sat Dec 17 22:32:58 2011] Using EEF radius (= 13.56 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 22:32:58 2011] Initial guess for spatial extent in simple fitting = 13.56"
[Sat Dec 17 22:32:58 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.070
[Sat Dec 17 22:32:58 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 13.56"
[Sun Dec 18 01:35:39 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25.ximg exists
[Sun Dec 18 01:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25.csv
[Sun Dec 18 01:35:39 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Dec 18 01:35:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25.csv
[Sun Dec 18 01:35:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 01:35:40 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Dec 18 01:35:40 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Dec 18 01:35:40 2011] Fit fullrun_mos1_xmm0084020601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Dec 18 04:40:03 2011] Warning, spatial fit 25 centroid is now closest to src. 33
[Sun Dec 18 04:40:03 2011] Spatial fit model total counts = 944.881000, observed total counts = 941.000000
[Sun Dec 18 04:40:03 2011] Offset between fit and detection position for source 25 = 1.960004 pixels
[Sun Dec 18 04:40:03 2011] Warning, changing simple spatial fit ID from 25 to 33
[Sun Dec 18 04:40:03 2011] 800.027000 total counts/ 591.812000 bgd. counts: snr = 8.558943
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.960004 pixels
  Position = (275.8, 105.0) = 18 39 59.59 4 49 27.3
  Extent = 23.9" x 5.7", rotation angle = 91
  Source counts = 208.2 +/- 28.3
  Background counts = 591.8
  Rate = 0.01 +/- 0.001
[Sun Dec 18 04:40:03 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 04:40:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 04:40:03 2011] Assessing source extent using major
[Sun Dec 18 04:40:03 2011] Source does appear to be extended
[Sun Dec 18 04:40:03 2011] Computing asymmetry using major and minor axis, asym = 4.20
[Sun Dec 18 04:40:03 2011] Source is asymmetric
[Sun Dec 18 04:40:03 2011] Source is confused with source 3
[Sun Dec 18 04:40:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 04:40:29 2011] Initial guess for spatial extent in simple fitting = 14.77"
[Sun Dec 18 04:40:29 2011] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.054
[Sun Dec 18 04:40:29 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 14.77"
[Sun Dec 18 07:58:00 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21.ximg exists
[Sun Dec 18 07:58:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21.csv
[Sun Dec 18 07:58:00 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Dec 18 07:58:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21.csv
[Sun Dec 18 07:58:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 07:58:01 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Dec 18 07:58:01 2011] fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Dec 18 07:58:01 2011] Fit fullrun_mos1_xmm0084020601_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sun Dec 18 10:24:15 2011] Warning, spatial fit 21 centroid is now closest to src. 33
[Sun Dec 18 10:24:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 10:24:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 10:24:15 2011] Assessing source extent using major
[Sun Dec 18 10:24:15 2011] Source does appear to be extended
[Sun Dec 18 10:24:15 2011] Computing asymmetry using major and minor axis, asym = 4.20
[Sun Dec 18 10:24:15 2011] Source is asymmetric
[Sun Dec 18 10:24:40 2011] XMMSAS src. selection expression = ellipse(23948.953000, 9089.230000, 1431.528041, 341.019610, 91.188040, X, Y)
[Sun Dec 18 10:24:40 2011] Writing source region out to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25_src.reg
[Sun Dec 18 10:24:40 2011] Extracting stamp from image fullrun_mos1_xmm0084020601_pi300-10000_cl_sm2.00.img.gz, (194, 23) - (358, 187)
[Sun Dec 18 10:24:40 2011] XMMSAS bgd. selection expression = annulus(23948.953000, 9089.230000, 2385.880069, 4771.760137, X, Y) && !ellipse(24128.247223, 13090.804565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.594208, 10306.083725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23970.663269, 9882.137276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23936.601898, 7964.645248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24129.529602, 14212.185394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24052.642609, 12130.122040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.917725, 11259.626877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.993000, 9362.724000, 700.456820, 700.456820, 0.000000, X, Y)
[Sun Dec 18 10:24:40 2011] Writing fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25.gif
[Sun Dec 18 10:35:23 2011] Mean detx,y = (15337.38, -112.30) 
[Sun Dec 18 10:35:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Dec 18 10:36:21 2011] Binned source spectrum to 10 counts/bin
[Sun Dec 18 10:36:21 2011] Setting source spectrum file to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Dec 18 10:36:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Dec 18 14:19:41 2011] Updating aperture counts using extracted products
[Sun Dec 18 14:19:41 2011] Error reading totcts from fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Dec 18 14:19:43 2011] Calculating source flux in energy range 0.30-8.00
[Sun Dec 18 14:19:43 2011] Using photon index=1.80, rate=0.00973, arf fullrun_mos1_xmm0084020601_pi300-10000_pass1_cl_src25.arf
[Sun Dec 18 14:19:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Dec 18 14:19:43 2011] Updating source flux to 3.1e-13
[Sun Dec 18 14:19:49 2011] Flag c found in src. 25 procflags, skipping spectral fitting