[Thu Mar 29 23:37:17 2012] Detection parameters:
  Position = (279.5, 155.0) = 18 39 58.49 4 53 4.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.6 +/- 25.7
  Background counts = 54.3
  Rate = 0.02 +/- 0.001

[Thu Mar 29 23:37:18 2012] Off-axis axis estimate = 10.49'
[Fri Mar 30 02:40:45 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:40:45 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Fri Mar 30 02:40:45 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Fri Mar 30 02:40:45 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.67"
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9.csv
[Fri Mar 30 05:12:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Mar 30 05:12:39 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Mar 30 05:13:05 2012] Source 6 is offset by 0.200557 and -3.051830 pixels which is larger than
2 X fitted extent = 1.375278 x 1.375278, not incorporating fit results
[Fri Mar 30 05:13:05 2012] Warning, spatial fit 9 centroid is now closest to src. 4
[Fri Mar 30 05:13:05 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.446750 pixels away
[Fri Mar 30 05:13:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 05:13:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 05:13:05 2012] Assessing source extent using major
[Fri Mar 30 05:13:05 2012] Source does appear to be extended
[Fri Mar 30 05:13:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 05:13:05 2012] Source is confused with source 5
[Fri Mar 30 07:31:05 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 07:31:05 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Fri Mar 30 07:31:05 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.036
[Fri Mar 30 07:31:05 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.67"
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9.ximg exists
[Fri Mar 30 11:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Mar 30 11:40:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9.csv
[Fri Mar 30 11:40:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Mar 30 11:40:41 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Mar 30 11:41:11 2012] Warning, spatial fit 9 centroid is now closest to src. 4
[Fri Mar 30 11:41:11 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.446750 pixels away
[Fri Mar 30 11:41:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 11:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 11:41:11 2012] Assessing source extent using major
[Fri Mar 30 11:41:11 2012] Source does appear to be extended
[Fri Mar 30 11:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 13:06:09 2012] XMMSAS src. selection expression = ellipse(24268.987671, 13436.316803, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 13:06:09 2012] Writing source region out to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6_src.reg
[Fri Mar 30 13:06:09 2012] Extracting stamp from image fullrun_mos2_xmm0084020501_pi300-10000_cl_sm2.00.img.gz, (242, 117) - (317, 192)
[Fri Mar 30 13:06:09 2012] XMMSAS bgd. selection expression = annulus(24268.987671, 13436.316803, 1087.500000, 2175.000000, X, Y) && !ellipse(24212.150200, 15383.182000, 962.176028, 962.176028, 0.000000, X, Y) && !ellipse(24190.453400, 15818.182000, 962.176028, 962.176028, 0.000000, X, Y) && !ellipse(24226.618713, 12736.038223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24148.712189, 11347.765884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24346.100342, 14034.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.709503, 14906.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.924805, 11696.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24170.454224, 10726.696785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24187.650848, 12212.994797, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 13:06:09 2012] Writing fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6.gif
[Fri Mar 30 13:11:31 2012] Mean detx,y = (-91.00, 10907.57) 
[Fri Mar 30 13:11:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 13:11:52 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 13:11:53 2012] Setting source spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Mar 30 13:11:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Mar 30 13:47:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 13:47:54 2012] rmf not generated due to insufficient counts
[Fri Mar 30 14:19:04 2012] Updating aperture counts using extracted products
[Fri Mar 30 14:19:04 2012] Error reading totcts from fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Mar 30 14:19:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 14:19:06 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src6.arf
[Fri Mar 30 14:19:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 14:19:07 2012] Updating source flux to 4.2e-13
[Fri Mar 30 14:21:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting