[Thu Mar 29 23:37:16 2012] Detection parameters:
  Position = (279.0, 146.9) = 18 39 58.63 4 52 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 372.4 +/- 26.6
  Background counts = 44.5
  Rate = 0.02 +/- 0.001

[Thu Mar 29 23:37:18 2012] Off-axis axis estimate = 11.07'
[Fri Mar 30 02:40:45 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:40:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 02:40:45 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Fri Mar 30 02:40:45 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Fri Mar 30 02:40:45 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.96"
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5.csv
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5.csv
[Fri Mar 30 05:12:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Mar 30 05:12:39 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Mar 30 05:13:05 2012] Warning, spatial fit 5 centroid is now closest to src. 6
[Fri Mar 30 05:13:05 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.420257 pixels away
[Fri Mar 30 05:13:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 05:13:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 05:13:05 2012] Assessing source extent using major
[Fri Mar 30 05:13:05 2012] Source does appear to be extended
[Fri Mar 30 05:13:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 05:13:05 2012] Source is confused with source 38
[Fri Mar 30 07:31:05 2012] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 07:31:05 2012] Initial guess for spatial extent in simple fitting = 11.96"
[Fri Mar 30 07:31:05 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.852
[Fri Mar 30 07:31:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.96"
[Fri Mar 30 11:40:40 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar 30 11:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5.csv
[Fri Mar 30 11:40:40 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar 30 11:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5.csv
[Fri Mar 30 11:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar 30 11:40:41 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Mar 30 11:41:11 2012] Warning, spatial fit 5 centroid is now closest to src. 5
[Fri Mar 30 11:41:11 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.420257 pixels away
[Fri Mar 30 11:41:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 11:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 11:41:11 2012] Assessing source extent using major
[Fri Mar 30 11:41:11 2012] Source does appear to be extended
[Fri Mar 30 11:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 13:06:09 2012] XMMSAS src. selection expression = ellipse(24226.618713, 12736.038223, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 13:06:09 2012] Writing source region out to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4_src.reg
[Fri Mar 30 13:06:09 2012] Extracting stamp from image fullrun_mos2_xmm0084020501_pi300-10000_cl_sm2.00.img.gz, (242, 109) - (317, 184)
[Fri Mar 30 13:06:09 2012] XMMSAS bgd. selection expression = annulus(24226.618713, 12736.038223, 1087.500000, 2175.000000, X, Y) && !ellipse(24212.150200, 15383.182000, 962.176028, 962.176028, 0.000000, X, Y) && !ellipse(24190.453400, 15818.182000, 962.176028, 962.176028, 0.000000, X, Y) && !ellipse(24148.712189, 11347.765884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24346.100342, 14034.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.987671, 13436.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24249.709503, 14906.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.307312, 10311.290901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.924805, 11696.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24062.237200, 8653.842000, 2192.040063, 280.580008, 91.206690, X, Y) && !ellipse(24170.454224, 10726.696785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24187.650848, 12212.994797, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 13:06:09 2012] Writing fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4.gif
[Fri Mar 30 13:09:07 2012] Mean detx,y = (-106.79, 11596.44) 
[Fri Mar 30 13:09:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 13:09:27 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 13:09:28 2012] Setting source spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 30 13:09:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 30 13:45:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 13:45:53 2012] rmf not generated due to insufficient counts
[Fri Mar 30 14:19:04 2012] Updating aperture counts using extracted products
[Fri Mar 30 14:19:04 2012] Error reading totcts from fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 30 14:19:06 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 14:19:06 2012] Using photon index=1.80, rate=0.0175, arf fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src4.arf
[Fri Mar 30 14:19:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 14:19:06 2012] Updating source flux to 5e-13
[Fri Mar 30 14:21:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting