[Thu Mar 29 23:37:18 2012] Detection parameters:
  Position = (368.3, 234.0) = 18 39 32.63 4 58 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 17.7
  Background counts = 100.2
  Rate = 0.007 +/- 0.001

[Thu Mar 29 23:37:18 2012] Off-axis axis estimate = 6.89'
[Fri Mar 30 02:40:45 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 02:40:45 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Fri Mar 30 02:40:45 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.977
[Fri Mar 30 02:40:45 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.87"
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30.csv
[Fri Mar 30 05:12:38 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Mar 30 05:12:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30.csv
[Fri Mar 30 05:12:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Mar 30 05:12:39 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Mar 30 05:12:39 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri Mar 30 05:13:05 2012] Spatial fit model total counts = 1280.440000, observed total counts = 1195.000000
[Fri Mar 30 05:13:05 2012] Offset between fit and detection position for source 32 = 3.380150 pixels
[Fri Mar 30 05:13:05 2012] 1212.250000 total counts/ 815.000000 bgd. counts: snr = 13.915061
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 3.380150 pixels
  Position = (371.1, 236.0) = 18 39 31.84 4 58 56.6
  Extent = 19.7 (19.7-19.7)", rotation angle = 0
  Source counts = 397.2 +/- 34.8
  Background counts = 815.0
  Rate = 0.02 +/- 0.002
[Fri Mar 30 05:13:05 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 05:13:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 05:13:05 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 05:13:05 2012] Source does appear to be extended
[Fri Mar 30 05:13:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 05:13:05 2012] Source is confused with source 31
[Fri Mar 30 07:31:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 07:31:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 30 07:31:05 2012] Initial guess for spatial extent in simple fitting = 19.74"
[Fri Mar 30 07:31:05 2012] source mask rpix=4.5, npix_max = 101, mask sum = 96, frac = 0.946
[Fri Mar 30 07:31:05 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 19.74"
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src30.ximg exists
[Fri Mar 30 11:40:41 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Mar 30 11:40:41 2012] Fit fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_src30 appears to have run properly
[Fri Mar 30 11:40:42 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Mar 30 11:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Mar 30 11:40:42 2012] fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Mar 30 11:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Mar 30 11:40:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:41:11 2012] Warning, spatial fit 30 centroid is now closest to src. 31
[Fri Mar 30 11:41:11 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 11:41:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 11:41:11 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 11:41:11 2012] Source does appear to be extended
[Fri Mar 30 11:41:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 13:06:10 2012] XMMSAS src. selection expression = ellipse(32235.010000, 20484.675800, 1184.376034, 1184.376034, 0.000000, X, Y)
[Fri Mar 30 13:06:10 2012] Writing source region out to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32_src.reg
[Fri Mar 30 13:06:10 2012] Extracting stamp from image fullrun_mos2_xmm0084020501_pi300-10000_cl_sm2.00.img.gz, (303, 168) - (439, 304)
[Fri Mar 30 13:06:10 2012] XMMSAS bgd. selection expression = annulus(32235.010000, 20484.675800, 1973.960057, 3947.920114, X, Y) && !ellipse(31574.245026, 20664.077835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31655.863281, 22778.316162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31788.492615, 23215.230438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31942.431213, 24752.572052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31915.097687, 21643.311050, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 13:06:10 2012] Writing fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32.gif
[Fri Mar 30 13:25:51 2012] Mean detx,y = (7658.53, 3560.69) 
[Fri Mar 30 13:25:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 13:27:22 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 13:27:22 2012] Setting source spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Mar 30 13:27:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Mar 30 14:19:05 2012] Updating aperture counts using extracted products
[Fri Mar 30 14:19:05 2012] Error reading totcts from fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Mar 30 14:19:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 14:19:07 2012] Using photon index=1.80, rate=0.0187, arf fullrun_mos2_xmm0084020501_pi300-10000_pass1_cl_src32.arf
[Fri Mar 30 14:19:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 14:19:08 2012] Updating source flux to 3.6e-13
[Fri Mar 30 14:21:58 2012] Flag c found in src. 32 procflags, skipping spectral fitting