[Thu Mar 29 23:36:30 2012] Detection parameters:
  Position = (280.3, 164.9) = 18 39 58.25 4 53 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.3 +/- 21.6
  Background counts = 79.6
  Rate = 0.01 +/- 0.002

[Thu Mar 29 23:36:30 2012] Off-axis axis estimate = 9.77'
[Thu Mar 29 23:39:49 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:39:49 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Thu Mar 29 23:39:49 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Thu Mar 29 23:39:49 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 11.31"
[Fri Mar 30 02:40:44 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38.ximg exists
[Fri Mar 30 02:40:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38.csv
[Fri Mar 30 02:40:44 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Mar 30 02:40:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38.csv
[Fri Mar 30 02:40:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:40:45 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Mar 30 02:40:45 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Mar 30 02:40:45 2012] Fit fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Mar 30 05:12:55 2012] Source 39 is offset by -9.767219 and 0.053383 pixels which is larger than
2 X fitted extent = 1.263766 x 1.263766, not incorporating fit results
[Fri Mar 30 05:12:55 2012] Warning, spatial fit 38 centroid is now closest to src. 38
[Fri Mar 30 05:12:55 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 05:12:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 05:12:55 2012] Assessing source extent using major
[Fri Mar 30 05:12:55 2012] Source does appear to be extended
[Fri Mar 30 05:12:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 05:12:55 2012] Source is confused with source 40
[Fri Mar 30 05:13:21 2012] Using EEF radius (= 11.31 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 05:13:21 2012] Initial guess for spatial extent in simple fitting = 11.31"
[Fri Mar 30 05:13:21 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.936
[Fri Mar 30 05:13:21 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 11.31"
[Fri Mar 30 07:31:03 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36.ximg exists
[Fri Mar 30 07:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36.csv
[Fri Mar 30 07:31:03 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36_1.ximg exists
[Fri Mar 30 07:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36.csv
[Fri Mar 30 07:31:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 07:31:05 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Fri Mar 30 07:31:05 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Fri Mar 30 07:31:05 2012] Fit fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Fri Mar 30 11:40:58 2012] Source 39 is offset by -9.767219 and 0.053383 pixels which is larger than
2 X fitted extent = 1.263766 x 1.263766, not incorporating fit results
[Fri Mar 30 11:40:58 2012] Warning, spatial fit 36 centroid is now closest to src. 38
[Fri Mar 30 11:40:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 11:40:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 11:40:58 2012] Assessing source extent using major
[Fri Mar 30 11:40:58 2012] Source does appear to be extended
[Fri Mar 30 11:40:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 11:41:26 2012] XMMSAS src. selection expression = ellipse(24341.331909, 14301.564301, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 11:41:26 2012] Writing source region out to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39_src.reg
[Fri Mar 30 11:41:26 2012] Extracting stamp from image fullrun_mos1_xmm0084020501_pi300-10000_cl_sm2.00.img.gz, (243, 127) - (318, 202)
[Fri Mar 30 11:41:26 2012] XMMSAS bgd. selection expression = annulus(24341.331909, 14301.564301, 1087.500000, 2175.000000, X, Y) && !ellipse(24241.553000, 11232.692440, 898.736026, 898.736026, 0.000000, X, Y) && !ellipse(24320.665161, 17266.634644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24336.996246, 16032.485428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.652200, 12583.529600, 860.296025, 860.296025, 0.000000, X, Y) && !ellipse(24346.757200, 15647.036800, 740.332021, 740.332021, 0.000000, X, Y) && !ellipse(24288.026886, 15078.188248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24357.639099, 13952.798325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.251831, 13176.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.859192, 11870.133606, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 11:41:26 2012] Writing fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39.gif
[Fri Mar 30 11:59:19 2012] Mean detx,y = (10249.36, -88.97) 
[Fri Mar 30 11:59:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 11:59:38 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 11:59:39 2012] Setting source spectrum file to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri Mar 30 11:59:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Fri Mar 30 13:05:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 13:05:15 2012] rmf not generated due to insufficient counts
[Fri Mar 30 14:19:01 2012] Updating aperture counts using extracted products
[Fri Mar 30 14:19:01 2012] Error reading totcts from fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri Mar 30 14:19:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 14:19:03 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src39.arf
[Fri Mar 30 14:19:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 14:19:03 2012] Updating source flux to 2.9e-13
[Fri Mar 30 14:19:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting