[Thu Mar 29 23:36:29 2012] Detection parameters:
  Position = (203.1, 285.5) = 18 40 20.74 5 2 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.8 +/- 42.0
  Background counts = 144.6
  Rate = 0.01 +/- 0.003

[Thu Mar 29 23:36:30 2012] Off-axis axis estimate = 6.98'
[Thu Mar 29 23:39:49 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 23:39:49 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Thu Mar 29 23:39:49 2012] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.777
[Thu Mar 29 23:39:49 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.92"
[Fri Mar 30 02:40:43 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33.ximg exists
[Fri Mar 30 02:40:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 02:40:43 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Mar 30 02:40:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33.csv
[Fri Mar 30 02:40:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 02:40:45 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Mar 30 02:40:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Mar 30 02:40:45 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Mar 30 02:40:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Mar 30 02:40:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 05:12:55 2012] Warning, spatial fit 33 centroid is now closest to src. 35
[Fri Mar 30 05:12:55 2012] Source 34 is offset by -2.134821 and 2.540986 pixels which is larger than
2 X fitted extent = 1.150271 x 1.150271, not incorporating fit results
[Fri Mar 30 05:12:55 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 05:12:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 05:12:55 2012] Assessing source extent using major
[Fri Mar 30 05:12:55 2012] Source does appear to be extended
[Fri Mar 30 05:12:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 05:12:55 2012] Source is confused with source 33
[Fri Mar 30 05:13:21 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 05:13:21 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Mar 30 05:13:21 2012] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.777
[Fri Mar 30 05:13:21 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.92"
[Fri Mar 30 07:31:03 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31.ximg exists
[Fri Mar 30 07:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31.csv
[Fri Mar 30 07:31:03 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Mar 30 07:31:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31.csv
[Fri Mar 30 07:31:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 07:31:05 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Mar 30 07:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Mar 30 07:31:05 2012] fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Mar 30 07:31:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Mar 30 07:31:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084020501_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 11:40:58 2012] Source 34 is offset by -6.118200 and 3.696753 pixels which is larger than
2 X fitted extent = 1.150515 x 1.150515, not incorporating fit results
[Fri Mar 30 11:40:58 2012] Warning, spatial fit 31 centroid is now closest to src. 35
[Fri Mar 30 11:40:58 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 11:40:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 11:40:58 2012] Assessing source extent using major
[Fri Mar 30 11:40:58 2012] Source does appear to be extended
[Fri Mar 30 11:40:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 11:41:26 2012] XMMSAS src. selection expression = ellipse(17619.976562, 24789.357483, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 30 11:41:26 2012] Writing source region out to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34_src.reg
[Fri Mar 30 11:41:26 2012] Extracting stamp from image fullrun_mos1_xmm0084020501_pi300-10000_cl_sm2.00.img.gz, (166, 248) - (241, 323)
[Fri Mar 30 11:41:26 2012] XMMSAS bgd. selection expression = annulus(17619.976562, 24789.357483, 1087.500000, 2175.000000, X, Y) && !ellipse(17992.538239, 23090.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.091660, 27811.412720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17540.272583, 26125.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17721.430542, 25607.316254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17352.807602, 25179.999908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17599.669571, 23766.194153, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 30 11:41:26 2012] Writing fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34.gif
[Fri Mar 30 11:56:26 2012] Mean detx,y = (-91.92, 6955.88) 
[Fri Mar 30 11:56:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 30 11:57:01 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 30 11:57:02 2012] Setting source spectrum file to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Mar 30 11:57:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Mar 30 12:57:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 30 12:57:02 2012] rmf not generated due to insufficient counts
[Fri Mar 30 14:19:01 2012] Updating aperture counts using extracted products
[Fri Mar 30 14:19:01 2012] Error reading totcts from fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Mar 30 14:19:03 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 30 14:19:03 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos1_xmm0084020501_pi300-10000_pass1_cl_src34.arf
[Fri Mar 30 14:19:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 30 14:19:03 2012] Updating source flux to 2.1e-13
[Fri Mar 30 14:19:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting