[Thu Jun 21 16:23:39 2012] Detection parameters:
  Position = (419.0, 316.1) = 13 51 7.54 69 18 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 737.2 +/- 37.7
  Background counts = 96.0
  Rate = 0.02 +/- 0.001

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 8.83'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Thu Jun 21 16:28:57 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.85"
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3.csv
[Thu Jun 21 19:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 21 19:37:25 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 21 21:56:45 2012] Warning, spatial fit 3 centroid is now closest to src. 22
[Thu Jun 21 21:56:45 2012] Source 3 is offset by 1.269455 and 9.378861 pixels which is larger than
2 X fitted extent = 1.284097 x 1.284097, not incorporating fit results
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:57:01 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Thu Jun 21 21:57:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu Jun 21 21:57:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.85"
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3.csv
[Thu Jun 21 23:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 21 23:57:05 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 22 01:16:25 2012] Spatial fit model total counts = 1335.620000, observed total counts = 1332.000000
[Fri Jun 22 01:16:25 2012] Offset between fit and detection position for source 3 = 0.146002 pixels
[Fri Jun 22 01:16:25 2012] 818.767000 total counts/ 197.160000 bgd. counts: snr = 44.269691
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.146002 pixels
  Position = (418.9, 316.0) = 13 51 7.65 69 18 49.5
  Extent = 10.5 (9.6-11.5)", rotation angle = 0
  Source counts = 621.6 +/- 28.6
  Background counts = 197.2
  Rate = 0.04 +/- 0.002
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:37 2012] XMMSAS src. selection expression = ellipse(36392.882820, 27446.982000, 629.604018, 629.604018, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 22 01:16:37 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (383, 280) - (455, 352)
[Fri Jun 22 01:16:37 2012] XMMSAS bgd. selection expression = annulus(36392.882820, 27446.982000, 1049.340030, 2098.680060, X, Y) && !ellipse(38358.618000, 27536.942760, 819.736024, 819.736024, 0.000000, X, Y) && !ellipse(35095.923676, 27384.460114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37187.415039, 27504.483368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35460.804000, 27418.174600, 997.840029, 997.840029, 0.000000, X, Y) && !ellipse(34232.970000, 27386.610000, 1300.888037, 1300.888037, 0.000000, X, Y) && !ellipse(33607.372060, 27347.603000, 1183.088034, 419.912812, 357.865820, X, Y) && !ellipse(37643.761475, 27517.968262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36098.252991, 29970.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35912.679718, 28425.555511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37975.812714, 25558.211487, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3.gif
[Fri Jun 22 01:21:38 2012] Mean detx,y = (72.99, 12004.80) 
[Fri Jun 22 01:21:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:21:53 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:21:53 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 01:21:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=0.0366, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src3.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 1.9e-13
[Fri Jun 22 04:37:08 2012] Flag b found in src. 3 procflags, skipping spectral fitting