[Thu Jun 21 16:23:40 2012] Detection parameters:
  Position = (308.9, 312.1) = 13 52 37.97 69 18 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 581.1 +/- 38.5
  Background counts = 132.4
  Rate = 0.02 +/- 0.002

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 1.24'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 7.05"
[Thu Jun 21 16:28:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.889
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.05"
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25.csv
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25.csv
[Thu Jun 21 19:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 21 19:37:25 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 2240.380000, observed total counts = 2239.000000
[Thu Jun 21 21:56:45 2012] Offset between fit and detection position for source 25 = 4.523147 pixels
[Thu Jun 21 21:56:45 2012] 1952.671000 total counts/ 1062.140000 bgd. counts: snr = 27.324873
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.523147 pixels
  Position = (304.4, 312.6) = 13 52 41.65 69 18 36.4
  Extent = 14.1 (14.1-28.2)", rotation angle = 0
  Source counts = 890.5 +/- 44.2
  Background counts = 1062.1
  Rate = 0.05 +/- 0.003
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:56:45 2012] Source is confused with source 13
[Thu Jun 21 21:57:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 14.10"
[Thu Jun 21 21:57:01 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.875
[Thu Jun 21 21:57:01 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 14.10"
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22.csv
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22.csv
[Thu Jun 21 23:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:57:06 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jun 21 23:57:06 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jun 21 23:57:06 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Fri Jun 22 01:16:25 2012] Warning, spatial fit 22 centroid is now closest to src. 26
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:38 2012] XMMSAS src. selection expression = ellipse(26431.480000, 27150.503000, 846.030024, 846.030024, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25_src.reg
[Fri Jun 22 01:16:38 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (256, 264) - (353, 361)
[Fri Jun 22 01:16:38 2012] XMMSAS bgd. selection expression = annulus(26431.480000, 27150.503000, 1410.050041, 2820.100081, X, Y) && !ellipse(24099.362400, 26982.318800, 1589.301646, 1589.301646, 0.000000, X, Y) && !ellipse(27202.214800, 27094.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(29459.376600, 27181.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(28487.587914, 27136.988045, 1183.088034, 440.849601, 357.592367, X, Y) && !ellipse(27857.513429, 27116.475496, 1183.088034, 409.196965, 357.881597, X, Y) && !ellipse(22944.621887, 28652.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22401.940000, 28038.114000, 1320.880038, 1320.880038, 0.000000, X, Y) && !ellipse(23089.059962, 27523.908000, 862.040025, 862.040025, 0.000000, X, Y) && !ellipse(23048.513184, 26747.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23145.442993, 26222.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.213104, 25353.107819, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25.gif
[Fri Jun 22 01:46:17 2012] Mean detx,y = (128.79, 1922.28) 
[Fri Jun 22 01:46:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:46:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:46:47 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 22 01:46:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=0.0525, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src25.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 1.3e-13
[Fri Jun 22 04:37:08 2012] Flag c found in src. 25 procflags, skipping spectral fitting