[Thu Jun 21 16:23:40 2012] Detection parameters:
  Position = (261.4, 320.8) = 13 53 16.91 69 19 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.5 +/- 31.2
  Background counts = 129.4
  Rate = 0.01 +/- 0.001

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 3.14'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Thu Jun 21 16:28:57 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.914
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 8.00"
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src24.ximg exists
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Jun 21 19:37:25 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src24 appears to have run properly
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu Jun 21 19:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 1625.050000, observed total counts = 1651.000000
[Thu Jun 21 21:56:45 2012] Offset between fit and detection position for source 24 = 5.972746 pixels
[Thu Jun 21 21:56:45 2012] 1629.754000 total counts/ 1020.360000 bgd. counts: snr = 19.077500
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.972746 pixels
  Position = (265.9, 316.9) = 13 53 13.19 69 18 55.0
  Extent = 10.8" x 10.8", rotation angle = 0
  Source counts = 609.4 +/- 40.4
  Background counts = 1020.4
  Rate = 0.04 +/- 0.002
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:57:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Thu Jun 21 21:57:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 6, frac = 0.169
[Thu Jun 21 21:57:01 2012] Skipping simple spatial due to low active detector fraction
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:26 2012] Source is confused with source 23
[Fri Jun 22 01:16:38 2012] XMMSAS src. selection expression = ellipse(23089.059962, 27523.908000, 646.530019, 646.530019, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24_src.reg
[Fri Jun 22 01:16:38 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (229, 280) - (303, 354)
[Fri Jun 22 01:16:38 2012] XMMSAS bgd. selection expression = annulus(23089.059962, 27523.908000, 1077.550031, 2155.100062, X, Y) && !ellipse(24099.362400, 26982.318800, 1589.301646, 1589.301646, 0.000000, X, Y) && !ellipse(22944.621887, 28652.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22401.940000, 28038.114000, 1320.880038, 1320.880038, 0.000000, X, Y) && !ellipse(23048.513184, 26747.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21584.042000, 26274.776000, 1278.920037, 1278.920037, 0.000000, X, Y) && !ellipse(23145.442993, 26222.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.213104, 25353.107819, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24.gif
[Fri Jun 22 01:45:51 2012] Mean detx,y = (534.08, -1060.75) 
[Fri Jun 22 01:45:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:46:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:46:05 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 22 01:46:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=0.0359, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src24.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 3e-13
[Fri Jun 22 04:37:08 2012] Flag c found in src. 24 procflags, skipping spectral fitting