[Thu Jun 21 16:23:40 2012] Detection parameters:
  Position = (254.8, 324.0) = 13 53 22.37 69 19 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.4 +/- 26.9
  Background counts = 127.4
  Rate = 0.009 +/- 0.001

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 3.67'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 21 16:28:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.26"
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23.csv
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23.csv
[Thu Jun 21 19:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jun 21 19:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Jun 21 19:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 1403.570000, observed total counts = 1093.000000
[Thu Jun 21 21:56:45 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 1337.610000, observed total counts = 1173.000000
[Thu Jun 21 21:56:45 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 21:56:45 2012] Source 23 is offset by -3.164066 and 7.975925 pixels which is larger than
2 X fitted extent = 0.881885 x 0.881885, not incorporating fit results
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:57:01 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Thu Jun 21 21:57:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Thu Jun 21 21:57:01 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.26"
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21.csv
[Thu Jun 21 23:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:57:06 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 21 23:57:06 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 21 23:57:06 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Fri Jun 22 01:16:25 2012] Spatial fit model total counts = 1403.020000, observed total counts = 1093.000000
[Fri Jun 22 01:16:25 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 01:16:25 2012] Spatial fit model total counts = 1209.020000, observed total counts = 1173.000000
[Fri Jun 22 01:16:25 2012] Offset between fit and detection position for source 23 = 3.482150 pixels
[Fri Jun 22 01:16:25 2012] 1086.826000 total counts/ 437.469000 bgd. counts: snr = 31.046303
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 3.482150 pixels
  Position = (258.1, 322.8) = 13 53 19.69 69 19 20.6
  Extent = 16.5 (16.5-16.5)", rotation angle = 0
  Source counts = 649.4 +/- 33.0
  Background counts = 437.5
  Rate = 0.04 +/- 0.002
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:26 2012] Source is confused with source 21
[Fri Jun 22 01:16:38 2012] XMMSAS src. selection expression = ellipse(22401.940000, 28038.114000, 990.660029, 990.660029, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 22 01:16:38 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (201, 266) - (315, 380)
[Fri Jun 22 01:16:38 2012] XMMSAS bgd. selection expression = annulus(22401.940000, 28038.114000, 1651.100048, 3302.200095, X, Y) && !ellipse(24099.362400, 26982.318800, 1589.301646, 1589.301646, 0.000000, X, Y) && !ellipse(22944.621887, 28652.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23089.059962, 27523.908000, 862.040025, 862.040025, 0.000000, X, Y) && !ellipse(26431.480000, 27150.503000, 1128.040032, 1128.040032, 0.000000, X, Y) && !ellipse(23048.513184, 26747.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21584.042000, 26274.776000, 1278.920037, 1278.920037, 0.000000, X, Y) && !ellipse(23145.442993, 26222.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.213104, 25353.107819, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:16:38 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23.gif
[Fri Jun 22 01:45:01 2012] Mean detx,y = (1083.17, -1833.31) 
[Fri Jun 22 01:45:04 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:45:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:45:39 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 22 01:45:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=0.0383, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src23.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 9.7e-14
[Fri Jun 22 04:37:08 2012] Flag b found in src. 23 procflags, skipping spectral fitting
[Fri Jun 22 04:37:08 2012] Flag p found in src. 23 procflags, skipping spectral fitting
[Fri Jun 22 04:37:08 2012] Flag c found in src. 23 procflags, skipping spectral fitting