[Thu Jun 21 16:23:40 2012] Detection parameters:
  Position = (348.2, 313.3) = 13 52 5.66 69 18 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 687.7 +/- 37.3
  Background counts = 120.6
  Rate = 0.03 +/- 0.002

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 3.76'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Thu Jun 21 16:28:57 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 8.31"
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12.csv
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12.csv
[Thu Jun 21 19:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 21 19:37:25 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 1655.400000, observed total counts = 1500.000000
[Thu Jun 21 21:56:45 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:57:01 2012] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 8.31"
[Thu Jun 21 21:57:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Thu Jun 21 21:57:01 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.31"
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10.csv
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun 21 23:57:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10.csv
[Thu Jun 21 23:57:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 21 23:57:05 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Jun 22 01:16:25 2012] Spatial fit model total counts = 1500.000000, observed total counts = 1500.000000
[Fri Jun 22 01:16:25 2012] Offset between fit and detection position for source 12 = 0.207117 pixels
[Fri Jun 22 01:16:25 2012] 936.697000 total counts/ 308.042000 bgd. counts: snr = 35.818501
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.207117 pixels
  Position = (348.3, 313.4) = 13 52 5.57 69 18 39.6
  Extent = 10.6 (9.6-11.6)", rotation angle = 0
  Source counts = 628.7 +/- 30.6
  Background counts = 308.0
  Rate = 0.04 +/- 0.002
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:26 2012] Source is confused with source 10
[Fri Jun 22 01:16:37 2012] XMMSAS src. selection expression = ellipse(30255.939000, 27219.559800, 637.548018, 637.548018, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12_src.reg
[Fri Jun 22 01:16:37 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (312, 277) - (385, 350)
[Fri Jun 22 01:16:37 2012] XMMSAS bgd. selection expression = annulus(30255.939000, 27219.559800, 1062.580031, 2125.160061, X, Y) && !ellipse(31162.490800, 27268.430066, 1378.056040, 1378.056040, 0.000000, X, Y) && !ellipse(27202.214800, 27094.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(29459.376600, 27181.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(28487.587914, 27136.988045, 1183.088034, 440.849601, 357.592367, X, Y) && !ellipse(27857.513429, 27116.475496, 1183.088034, 409.196965, 357.881597, X, Y) && !ellipse(31152.827000, 25768.614800, 324.531209, 324.531209, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12.gif
[Fri Jun 22 01:33:24 2012] Mean detx,y = (77.64, 5845.67) 
[Fri Jun 22 01:33:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:33:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:33:40 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 22 01:33:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=0.037, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src12.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 1.3e-13
[Fri Jun 22 04:37:08 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Fri Jun 22 04:37:08 2012] Flag c found in src. 12 procflags, skipping spectral fitting