[Thu Jun 21 16:23:39 2012] Detection parameters:
  Position = (277.6, 310.8) = 13 53 3.66 69 18 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296332.4 +/- 636.7
  Background counts = 134.8
  Rate = 1e+01 +/- 0.02

[Thu Jun 21 16:23:41 2012] Off-axis axis estimate = 1.76'
[Thu Jun 21 16:28:57 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 16:28:57 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jun 21 16:28:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.052
[Thu Jun 21 16:28:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 19:37:24 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 19:37:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 19:37:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 19:37:25 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 19:37:25 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 21:56:45 2012] Spatial fit model total counts = 172318.000000, observed total counts = 175379.000000
[Thu Jun 21 21:56:45 2012] Offset between fit and detection position for source 1 = 0.131953 pixels
[Thu Jun 21 21:56:45 2012] 172136.000000 total counts/ 25600.000000 bgd. counts: snr = 915.850000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.131953 pixels
  Position = (277.6, 310.7) = 13 53 3.65 69 18 28.1
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 146536.0 +/- 414.9
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Thu Jun 21 21:56:45 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:45 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 21:56:45 2012] Source does appear to be extended
[Thu Jun 21 21:56:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 21:57:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 21:57:01 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Thu Jun 21 21:57:01 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Thu Jun 21 21:57:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.60"
[Thu Jun 21 23:57:04 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 21 23:57:05 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 21 23:57:05 2012] fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 21 23:57:05 2012] Fit fullrun_pn_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 01:16:25 2012] Spatial fit model total counts = 177569.000000, observed total counts = 175331.000000
[Fri Jun 22 01:16:25 2012] Offset between fit and detection position for source 1 = 0.015495 pixels
[Fri Jun 22 01:16:25 2012] 172491.000000 total counts/ 25600.000000 bgd. counts: snr = 918.068750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015495 pixels
  Position = (277.6, 310.7) = 13 53 3.65 69 18 28.0
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 146891.0 +/- 415.3
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Fri Jun 22 01:16:26 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:26 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:26 2012] Source does appear to be extended
[Fri Jun 22 01:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 01:16:37 2012] Counts = 146891.000000, rescaling region sizes by 3.000000
[Fri Jun 22 01:16:37 2012] XMMSAS src. selection expression = ellipse(24099.362400, 26982.318800, 1191.976234, 1191.976234, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing source region out to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 01:16:37 2012] Extracting stamp from image fullrun_pn_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (209, 242) - (346, 379)
[Fri Jun 22 01:16:37 2012] XMMSAS bgd. selection expression = annulus(24099.362400, 26982.318800, 5959.881171, 11919.762343, X, Y) && !ellipse(36392.882820, 27446.982000, 839.472024, 839.472024, 0.000000, X, Y) && !ellipse(35095.923676, 27384.460114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35460.804000, 27418.174600, 997.840029, 997.840029, 0.000000, X, Y) && !ellipse(34232.970000, 27386.610000, 1300.888037, 1300.888037, 0.000000, X, Y) && !ellipse(31162.490800, 27268.430066, 1378.056040, 1378.056040, 0.000000, X, Y) && !ellipse(33607.372060, 27347.603000, 1183.088034, 419.912812, 357.865820, X, Y) && !ellipse(30255.939000, 27219.559800, 850.064024, 850.064024, 0.000000, X, Y) && !ellipse(27202.214800, 27094.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(29459.376600, 27181.769200, 988.328028, 988.328028, 0.000000, X, Y) && !ellipse(28487.587914, 27136.988045, 1183.088034, 440.849601, 357.592367, X, Y) && !ellipse(27857.513429, 27116.475496, 1183.088034, 409.196965, 357.881597, X, Y) && !ellipse(21791.646210, 35099.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36098.252991, 29970.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22944.621887, 28652.305634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35912.679718, 28425.555511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22401.940000, 28038.114000, 1320.880038, 1320.880038, 0.000000, X, Y) && !ellipse(23089.059962, 27523.908000, 862.040025, 862.040025, 0.000000, X, Y) && !ellipse(26431.480000, 27150.503000, 1128.040032, 1128.040032, 0.000000, X, Y) && !ellipse(23048.513184, 26747.237152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13542.176804, 26662.544373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21584.042000, 26274.776000, 1278.920037, 1278.920037, 0.000000, X, Y) && !ellipse(31152.827000, 25768.614800, 324.531209, 324.531209, 0.000000, X, Y) && !ellipse(23145.442993, 26222.279449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22022.023102, 14393.760193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23250.213104, 25353.107819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.293091, 14366.751907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18823.157516, 23317.395966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14179.549774, 22972.935120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34009.459137, 22686.168060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22171.770000, 22739.402000, 419.514412, 419.514412, 0.000000, X, Y) && !ellipse(27009.442535, 19809.743835, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 01:16:37 2012] Writing fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 01:17:01 2012] Mean detx,y = (81.53, -284.70) 
[Fri Jun 22 01:17:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 01:20:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 01:20:56 2012] Setting source spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 01:20:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 04:35:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:51 2012] Error reading totcts from fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 04:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:52 2012] Using photon index=1.80, rate=8.66, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 04:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:52 2012] Updating source flux to 2e-11
[Fri Jun 22 04:39:23 2012] Reading fit data from xmm0083960101/analysis//spectral/fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 04:39:23 2012] Spectral fit parameter nH value = 1.08878e+13
[Fri Jun 22 04:39:23 2012] Spectral fit parameter PhoIndex value = 2.01797
[Fri Jun 22 04:39:23 2012] Failed to get F(0.3-8.0) from xmm0083960101/analysis//spectral/fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 04:39:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:39:23 2012] Using Nh = 1.1e+13, photon index=2.02, rate=8.66, arf fullrun_pn_xmm0083960101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 04:39:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:39:23 2012] Updating source flux to 1.8e-11