[Thu Jun 21 16:24:58 2012] Detection parameters:
  Position = (277.7, 310.9) = 13 53 3.50 69 18 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92502.2 +/- 359.5
  Background counts = 46.2
  Rate = 3 +/- 0.01

[Thu Jun 21 16:24:59 2012] Off-axis axis estimate = 1.75'
[Thu Jun 21 20:05:25 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 20:05:25 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Jun 21 20:05:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Thu Jun 21 20:05:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Thu Jun 21 21:56:35 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 21 21:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 21:56:35 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 21 21:56:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1.csv
[Thu Jun 21 21:56:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 21:56:36 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 21 21:56:36 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 21 21:56:36 2012] Fit fullrun_mos2_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 21 21:56:53 2012] Spatial fit model total counts = 81179.000000, observed total counts = 76712.000000
[Thu Jun 21 21:56:53 2012] Offset between fit and detection position for source 1 = 0.200317 pixels
[Thu Jun 21 21:56:53 2012] 81356.100000 total counts/ 21594.300000 bgd. counts: snr = 406.681208
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.200317 pixels
  Position = (277.6, 310.7) = 13 53 3.59 69 18 28.1
  Extent = 6.4 (6.4-6.5)", rotation angle = 0
  Source counts = 59761.8 +/- 285.2
  Background counts = 21594.3
  Rate = 2 +/- 0.01
[Thu Jun 21 21:56:53 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:53 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 21:56:53 2012] Source does appear to be extended
[Thu Jun 21 21:56:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 00:11:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 00:11:20 2012] Initial guess for spatial extent in simple fitting = 6.42"
[Fri Jun 22 00:11:20 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.025
[Fri Jun 22 00:11:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.42"
[Fri Jun 22 01:16:17 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 01:16:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 01:16:17 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 01:16:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 01:16:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 01:16:17 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 01:16:17 2012] fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 01:16:17 2012] Fit fullrun_mos2_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 01:16:29 2012] Spatial fit model total counts = 80195.800000, observed total counts = 76839.000000
[Fri Jun 22 01:16:29 2012] Offset between fit and detection position for source 1 = 0.023405 pixels
[Fri Jun 22 01:16:29 2012] 81193.000000 total counts/ 22045.900000 bgd. counts: snr = 398.354327
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023405 pixels
  Position = (277.6, 310.7) = 13 53 3.61 69 18 28.0
  Extent = 6.4 (6.3-6.4)", rotation angle = 0
  Source counts = 59147.1 +/- 284.9
  Background counts = 22045.9
  Rate = 2 +/- 0.01
[Fri Jun 22 01:16:29 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:29 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:29 2012] Source does appear to be extended
[Fri Jun 22 01:16:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 04:23:27 2012] Counts = 59147.100000, rescaling region sizes by 3.000000
[Fri Jun 22 04:23:27 2012] XMMSAS src. selection expression = ellipse(24103.976000, 26983.498800, 1144.456233, 1144.456233, 0.000000, X, Y)
[Fri Jun 22 04:23:27 2012] Writing source region out to fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 04:23:27 2012] Extracting stamp from image fullrun_mos2_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (212, 245) - (343, 376)
[Fri Jun 22 04:23:27 2012] XMMSAS bgd. selection expression = annulus(24103.976000, 26983.498800, 5722.281165, 11444.562329, X, Y) && !ellipse(24304.049988, 27993.741547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24808.654236, 28021.977783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23775.895630, 27953.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23343.502869, 28006.748535, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 04:23:27 2012] Writing fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 04:23:35 2012] Mean detx,y = (77.90, 143.52) 
[Fri Jun 22 04:23:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 04:29:14 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 04:29:14 2012] Setting source spectrum file to fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 04:29:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 04:35:53 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:53 2012] Error reading totcts from fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 04:35:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:53 2012] Using photon index=1.80, rate=2.12, arf fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 04:35:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:53 2012] Updating source flux to 2.1e-11
[Fri Jun 22 04:37:08 2012] Reading fit data from xmm0083960101/analysis//spectral/fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 04:37:08 2012] Spectral fit parameter nH value = 1.67303e+14
[Fri Jun 22 04:37:08 2012] Spectral fit parameter PhoIndex value = 1.98579
[Fri Jun 22 04:37:08 2012] Failed to get F(0.3-8.0) from xmm0083960101/analysis//spectral/fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 04:37:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:37:08 2012] Using Nh = 1.7e+14, photon index=1.99, rate=2.12, arf fullrun_mos2_xmm0083960101_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 04:37:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:37:08 2012] Updating source flux to 2e-11