[Thu Jun 21 16:24:23 2012] Detection parameters:
  Position = (257.1, 306.3) = 13 53 20.39 69 18 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 16.2
  Background counts = 46.6
  Rate = 0.002 +/- 0.0005

[Thu Jun 21 16:24:23 2012] Off-axis axis estimate = 3.05'
[Thu Jun 21 19:37:26 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 19:37:26 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Thu Jun 21 19:37:26 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.922
[Thu Jun 21 19:37:26 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.95"
[Thu Jun 21 20:05:25 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Jun 21 20:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17.csv
[Thu Jun 21 20:05:25 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Jun 21 20:05:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17.csv
[Thu Jun 21 20:05:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 21 20:05:25 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Jun 21 20:05:25 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Jun 21 20:05:25 2012] Fit fullrun_mos1_xmm0083960101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Jun 21 21:56:48 2012] Spatial fit model total counts = 871.295000, observed total counts = 883.000000
[Thu Jun 21 21:56:48 2012] Offset between fit and detection position for source 11 = 8.373839 pixels
[Thu Jun 21 21:56:48 2012] 974.393000 total counts/ 824.780000 bgd. counts: snr = 5.209551
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 8.373839 pixels
  Position = (250.4, 301.3) = 13 53 25.89 69 17 46.9
  Extent = 15.9 (13.8-31.8)", rotation angle = 0
  Source counts = 149.6 +/- 31.2
  Background counts = 824.8
  Rate = 0.005 +/- 0.001
[Thu Jun 21 21:56:48 2012] Vigneting correction estimate = 1.000000
[Thu Jun 21 21:56:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 21 21:56:48 2012] Assessing source extent using major axis lower bound
[Thu Jun 21 21:56:48 2012] Source does appear to be extended
[Thu Jun 21 21:56:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 21 23:57:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 21 23:57:06 2012] Initial guess for spatial extent in simple fitting = 15.90"
[Thu Jun 21 23:57:06 2012] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.042
[Thu Jun 21 23:57:06 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 15.90"
[Fri Jun 22 00:11:20 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 22 00:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9.csv
[Fri Jun 22 00:11:20 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 22 00:11:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9.csv
[Fri Jun 22 00:11:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 00:11:20 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 22 00:11:20 2012] fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 22 00:11:20 2012] Fit fullrun_mos1_xmm0083960101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun 22 01:16:27 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.173567 pixels away
[Fri Jun 22 01:16:27 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 01:16:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 01:16:27 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 01:16:27 2012] Source does appear to be extended
[Fri Jun 22 01:16:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 03:59:33 2012] XMMSAS src. selection expression = ellipse(21739.960000, 26164.780000, 954.276027, 954.276027, 0.000000, X, Y)
[Fri Jun 22 03:59:33 2012] Writing source region out to fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11_src.reg
[Fri Jun 22 03:59:33 2012] Extracting stamp from image fullrun_mos1_xmm0083960101_pi300-10000_cl_sm2.00.img.gz, (196, 246) - (305, 356)
[Fri Jun 22 03:59:33 2012] XMMSAS bgd. selection expression = annulus(21739.960000, 26164.780000, 1590.460046, 3180.920092, X, Y) && !ellipse(24097.042400, 26991.714220, 1620.144047, 1566.372045, 90.000000, X, Y) && !ellipse(18833.189545, 23294.337036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21860.824000, 28552.310000, 1297.344037, 1297.344037, 0.000000, X, Y)
[Fri Jun 22 03:59:33 2012] Writing fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11.gif
[Fri Jun 22 04:05:43 2012] Mean detx,y = (2580.91, -904.03) 
[Fri Jun 22 04:05:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 04:05:58 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 04:05:58 2012] Setting source spectrum file to fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 22 04:05:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jun 22 04:35:53 2012] Updating aperture counts using extracted products
[Fri Jun 22 04:35:53 2012] Error reading totcts from fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jun 22 04:35:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 04:35:53 2012] Using photon index=1.80, rate=0.00544, arf fullrun_mos1_xmm0083960101_pi300-10000_pass1_cl_src11.arf
[Fri Jun 22 04:35:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 04:35:53 2012] Updating source flux to 5.4e-14