[Sat May 26 08:45:34 2012] Detection parameters:
  Position = (314.8, 316.2) = 4 0 54.56 34 43 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.0 +/- 15.0
  Background counts = 28.8
  Rate = 0.004 +/- 0.0006

[Sat May 26 08:45:34 2012] Off-axis axis estimate = 1.75'
[Sat May 26 09:09:40 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:09:40 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat May 26 09:09:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sat May 26 09:09:40 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.30"
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4.csv
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4.csv
[Sat May 26 09:16:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 26 09:16:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:16:26 2012] Source 6 is offset by -5.871721 and 5.906847 pixels which is larger than
2 X fitted extent = 0.839641 x 0.839641, not incorporating fit results
[Sat May 26 09:16:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:16:26 2012] Assessing source extent using major
[Sat May 26 09:16:26 2012] Source does appear to be extended
[Sat May 26 09:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:36:36 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:36:36 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat May 26 09:36:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sat May 26 09:36:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.30"
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 26 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4.csv
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 26 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4.csv
[Sat May 26 09:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 26 09:43:32 2012] Fit fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 26 09:43:38 2012] Spatial fit model total counts = 417.324000, observed total counts = 383.000000
[Sat May 26 09:43:38 2012] Offset between fit and detection position for source 6 = 0.849653 pixels
[Sat May 26 09:43:38 2012] 419.424000 total counts/ 349.922000 bgd. counts: snr = 3.715452
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.849653 pixels
  Position = (314.3, 316.9) = 4 0 54.74 34 43 9.3
  Extent = 9.2 (3.7-9.2)", rotation angle = 0
  Source counts = 69.5 +/- 20.5
  Background counts = 349.9
  Rate = 0.003 +/- 0.0008
[Sat May 26 09:43:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:43:38 2012] Assessing source extent using major axis lower bound
[Sat May 26 09:43:38 2012] Source does appear to be extended
[Sat May 26 09:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 10:03:01 2012] XMMSAS src. selection expression = ellipse(27298.618000, 27519.077620, 550.519978, 550.519978, 0.000000, X, Y)
[Sat May 26 10:03:01 2012] Writing source region out to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6_src.reg
[Sat May 26 10:03:01 2012] Extracting stamp from image fullrun_mos2_xmm0083950101_pi300-10000_cl_sm2.00.img.gz, (283, 285) - (346, 349)
[Sat May 26 10:03:01 2012] XMMSAS bgd. selection expression = annulus(27298.618000, 27519.077620, 917.533296, 1835.066593, X, Y)
[Sat May 26 10:03:01 2012] Writing fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6.gif
[Sat May 26 10:03:58 2012] Mean detx,y = (36.02, 146.73) 
[Sat May 26 10:03:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 10:04:09 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 10:04:09 2012] Setting source spectrum file to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 26 10:04:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 26 10:12:50 2012] Not generating rmf since there are only 69 counts
[Sat May 26 10:12:50 2012] rmf not generated due to insufficient counts
[Sat May 26 10:13:57 2012] Updating aperture counts using extracted products
[Sat May 26 10:13:57 2012] Error reading totcts from fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 26 10:13:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 10:13:58 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src6.arf
[Sat May 26 10:13:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 10:13:58 2012] Updating source flux to 3e-14
[Sat May 26 10:14:22 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Sat May 26 10:14:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting