[Sat May 26 08:45:34 2012] Detection parameters:
  Position = (437.8, 289.0) = 4 0 11.18 34 41 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 467.9 +/- 26.7
  Background counts = 20.5
  Rate = 0.03 +/- 0.002

[Sat May 26 08:45:34 2012] Off-axis axis estimate = 10.13'
[Sat May 26 09:09:40 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat May 26 09:09:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 09:09:40 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sat May 26 09:09:40 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Sat May 26 09:09:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.49"
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1.csv
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 26 09:16:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1.csv
[Sat May 26 09:16:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 26 09:16:22 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 26 09:16:22 2012] Fit fullrun_mos2_xmm0083950101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat May 26 09:16:26 2012] Spatial fit model total counts = 664.999000, observed total counts = 665.000000
[Sat May 26 09:16:26 2012] Offset between fit and detection position for source 1 = 0.228981 pixels
[Sat May 26 09:16:26 2012] 663.681000 total counts/ 347.299000 bgd. counts: snr = 16.976963
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.228981 pixels
  Position = (437.6, 289.0) = 4 0 11.27 34 41 7.2
  Extent = 5.8 (5.2-6.6)", rotation angle = 0
  Source counts = 316.4 +/- 25.8
  Background counts = 347.3
  Rate = 0.01 +/- 0.001
[Sat May 26 09:16:26 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:16:26 2012] Assessing source extent using major axis lower bound
[Sat May 26 09:16:26 2012] Source does appear to be extended
[Sat May 26 09:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 09:36:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 26 09:36:36 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Sat May 26 09:36:36 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.904
[Sat May 26 09:36:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.75"
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1.csv
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 09:43:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1.csv
[Sat May 26 09:43:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 09:43:32 2012] fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 09:43:32 2012] Fit fullrun_mos2_xmm0083950101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 26 09:43:38 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Sat May 26 09:43:38 2012] Vigneting correction estimate = 1.000000
[Sat May 26 09:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 09:43:38 2012] Assessing source extent using major axis lower bound
[Sat May 26 09:43:38 2012] Source does appear to be extended
[Sat May 26 09:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 10:03:01 2012] XMMSAS src. selection expression = ellipse(38023.748900, 25090.538600, 345.049210, 345.049210, 0.000000, X, Y)
[Sat May 26 10:03:01 2012] Writing source region out to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 26 10:03:01 2012] Extracting stamp from image fullrun_mos2_xmm0083950101_pi300-10000_cl_sm2.00.img.gz, (418, 269) - (457, 309)
[Sat May 26 10:03:01 2012] XMMSAS bgd. selection expression = annulus(38023.748900, 25090.538600, 575.082017, 1150.164033, X, Y)
[Sat May 26 10:03:01 2012] Writing fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1.gif
[Sat May 26 10:03:05 2012] Mean detx,y = (-10920.88, -873.38) 
[Sat May 26 10:03:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 10:03:13 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 10:03:14 2012] Setting source spectrum file to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 10:03:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 26 10:13:56 2012] Updating aperture counts using extracted products
[Sat May 26 10:13:57 2012] Error reading totcts from fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 10:13:57 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 10:13:57 2012] Using photon index=1.80, rate=0.0124, arf fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1.arf
[Sat May 26 10:13:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 10:13:57 2012] Updating source flux to 2.6e-13
[Sat May 26 10:14:40 2012] Reading fit data from xmm0083950101/analysis//spectral/fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 26 10:14:40 2012] Spectral fit parameter nH value = 7.84272e+20
[Sat May 26 10:14:40 2012] Spectral fit parameter PhoIndex value = 1.69761
[Sat May 26 10:14:40 2012] Failed to get F(0.3-8.0) from xmm0083950101/analysis//spectral/fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 26 10:14:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 10:14:40 2012] Using Nh = 7.8e+20, photon index=1.70, rate=0.0124, arf fullrun_mos2_xmm0083950101_pi300-10000_pass1_cl_src1.arf
[Sat May 26 10:14:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 10:14:40 2012] Updating source flux to 3e-13