[Sat Dec 24 10:25:48 2011] Detection parameters:
  Position = (173.9, 146.0) = 17 4 37.98 -38 0 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 11.5
  Background counts = 9.3
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 10:25:49 2011] Off-axis axis estimate = 14.27'
[Sat Dec 24 11:16:25 2011] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 11:16:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 24 11:16:25 2011] Initial guess for spatial extent in simple fitting = 13.57"
[Sat Dec 24 11:16:25 2011] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.069
[Sat Dec 24 11:16:25 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 13.57"
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11.ximg exists
[Sat Dec 24 12:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11.csv
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Dec 24 12:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11.csv
[Sat Dec 24 12:17:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 12:17:16 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Dec 24 12:17:16 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Dec 24 12:17:16 2011] Fit fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Dec 24 12:17:29 2011] Spatial fit model total counts = 186.981000, observed total counts = 187.000000
[Sat Dec 24 12:17:29 2011] Offset between fit and detection position for source 5 = 0.198947 pixels
[Sat Dec 24 12:17:29 2011] 188.145200 total counts/ 148.309000 bgd. counts: snr = 3.271102
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.198947 pixels
  Position = (173.8, 146.2) = 17 4 38.01 -38 0 22.4
  Extent = 5.6 (3.6-10.0)", rotation angle = 0
  Source counts = 39.8 +/- 13.7
  Background counts = 148.3
  Rate = 0.001 +/- 0.0004
[Sat Dec 24 12:17:29 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 12:17:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 12:17:29 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 12:17:29 2011] Source does appear to be extended
[Sat Dec 24 12:17:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 12:17:29 2011] Deleting source due to low Poisson probability 0.8