[Sat Dec 24 10:25:48 2011] Detection parameters:
  Position = (286.0, 280.9) = 17 3 56.71 -37 50 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77884.8 +/- 332.5
  Background counts = 18.1
  Rate = 3 +/- 0.01

[Sat Dec 24 10:25:49 2011] Off-axis axis estimate = 1.56'
[Sat Dec 24 11:16:25 2011] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 11:16:25 2011] Initial guess for spatial extent in simple fitting = 7.21"
[Sat Dec 24 11:16:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Sat Dec 24 11:16:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Dec 24 12:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Dec 24 12:17:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1.csv
[Sat Dec 24 12:17:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Dec 24 12:17:15 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Dec 24 12:17:15 2011] Fit fullrun_mos2_xmm0083280401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Dec 24 12:17:29 2011] Spatial fit model total counts = 70481.600000, observed total counts = 70482.000000
[Sat Dec 24 12:17:29 2011] Offset between fit and detection position for source 2 = 0.068459 pixels
[Sat Dec 24 12:17:29 2011] 70736.400000 total counts/ 13533.500000 bgd. counts: snr = 491.714464
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.068459 pixels
  Position = (286.0, 280.9) = 17 3 56.71 -37 50 37.0
  Extent = 6.3 (6.2-6.3)", rotation angle = 0
  Source counts = 57202.9 +/- 266.0
  Background counts = 13533.5
  Rate = 2 +/- 0.009
[Sat Dec 24 12:17:29 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 12:17:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 12:17:29 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 12:17:29 2011] Source does appear to be extended
[Sat Dec 24 12:17:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 13:14:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 24 13:14:31 2011] Initial guess for spatial extent in simple fitting = 6.28"
[Sat Dec 24 13:14:31 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.058
[Sat Dec 24 13:14:31 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.28"
[Sat Dec 24 13:54:07 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 24 13:54:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1.csv
[Sat Dec 24 13:54:07 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 24 13:54:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1.csv
[Sat Dec 24 13:54:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 13:54:07 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 24 13:54:07 2011] fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 24 13:54:07 2011] Fit fullrun_mos2_xmm0083280401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 24 13:54:17 2011] Spatial fit model total counts = 70483.200000, observed total counts = 70482.000000
[Sat Dec 24 13:54:17 2011] Offset between fit and detection position for source 2 = 0.000027 pixels
[Sat Dec 24 13:54:17 2011] 70737.600000 total counts/ 13502.300000 bgd. counts: snr = 492.561073
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000027 pixels
  Position = (286.0, 280.9) = 17 3 56.71 -37 50 37.0
  Extent = 6.3 (6.2-6.3)", rotation angle = 0
  Source counts = 57235.3 +/- 266.0
  Background counts = 13502.3
  Rate = 2 +/- 0.009
[Sat Dec 24 13:54:17 2011] Vigneting correction estimate = 1.000000
[Sat Dec 24 13:54:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 24 13:54:17 2011] Assessing source extent using major axis lower bound
[Sat Dec 24 13:54:17 2011] Source does appear to be extended
[Sat Dec 24 13:54:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 24 14:11:28 2011] Counts = 57235.300000, rescaling region sizes by 3.000000
[Sat Dec 24 14:11:28 2011] XMMSAS src. selection expression = ellipse(24831.096160, 24385.650000, 1132.403433, 1132.403433, 0.000000, X, Y)
[Sat Dec 24 14:11:28 2011] Writing source region out to fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_src.reg
[Sat Dec 24 14:11:28 2011] Extracting stamp from image fullrun_mos2_xmm0083280401_pi300-10000_cl_sm2.00.img.gz, (221, 216) - (351, 346)
[Sat Dec 24 14:11:28 2011] XMMSAS bgd. selection expression = annulus(24831.096160, 24385.650000, 5662.017163, 11324.034326, X, Y) && !ellipse(24046.743134, 23794.289673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23887.990967, 24489.126770, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 24 14:11:28 2011] Writing fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2.gif
[Sat Dec 24 14:11:45 2011] Mean detx,y = (52.95, -144.02) 
[Sat Dec 24 14:11:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 24 14:17:21 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 24 14:17:21 2011] Setting source spectrum file to fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 24 14:17:21 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Dec 24 14:27:12 2011] Updating aperture counts using extracted products
[Sat Dec 24 14:27:13 2011] Error reading totcts from fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 24 14:27:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 14:27:13 2011] Using photon index=1.80, rate=1.85, arf fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2.arf
[Sat Dec 24 14:27:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 14:27:13 2011] Updating source flux to 2.2e-11
[Sat Dec 24 14:28:31 2011] Reading fit data from xmm0083280401/analysis//spectral/fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_pl.csv
[Sat Dec 24 14:28:31 2011] Spectral fit parameter nH value = 6.43346e+15
[Sat Dec 24 14:28:31 2011] Spectral fit parameter PhoIndex value = -1.84445
[Sat Dec 24 14:28:31 2011] Failed to get F(0.3-8.0) from xmm0083280401/analysis//spectral/fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Dec 24 14:28:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 24 14:28:31 2011] Using Nh = 6.4e+15, photon index=-1.84, rate=1.85, arf fullrun_mos2_xmm0083280401_pi300-10000_pass1_cl_src2.arf
[Sat Dec 24 14:28:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 24 14:28:31 2011] Updating source flux to 7.6e-11