[Tue Dec 20 22:52:57 2011] Detection parameters:
  Position = (276.0, 281.0) = 17 4 0.37 -37 50 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17001.4 +/- 171.2
  Background counts = 42.3
  Rate = 0.7 +/- 0.007

[Tue Dec 20 22:52:59 2011] Off-axis axis estimate = 2.06'
[Wed Dec 21 01:27:12 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:27:12 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Wed Dec 21 01:27:12 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.663
[Wed Dec 21 01:27:12 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.46"
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2.csv
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2.csv
[Wed Dec 21 04:23:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Dec 21 04:23:42 2011] Fit fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Dec 21 04:24:04 2011] Source 5 is offset by -6.877739 and 1.385821 pixels which is larger than
2 X fitted extent = 6.858299 x 6.858299, not incorporating fit results
[Wed Dec 21 04:24:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:24:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:24:04 2011] Assessing source extent using major
[Wed Dec 21 04:24:04 2011] Source does appear to be extended
[Wed Dec 21 04:24:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 07:08:56 2011] Using EEF radius (= 7.46 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:08:56 2011] Initial guess for spatial extent in simple fitting = 7.46"
[Wed Dec 21 07:08:56 2011] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.663
[Wed Dec 21 07:08:56 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.46"
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2.csv
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2.csv
[Wed Dec 21 08:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Dec 21 08:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 08:14:15 2011] Source 5 is offset by 1.005317 and -5.471789 pixels which is larger than
2 X fitted extent = 4.443504 x 4.443504, not incorporating fit results
[Wed Dec 21 08:14:15 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 08:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 08:14:15 2011] Assessing source extent using major
[Wed Dec 21 08:14:15 2011] Source does appear to be extended
[Wed Dec 21 08:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 09:14:12 2011] Counts = 17001.351562, rescaling region sizes by 3.000000
[Wed Dec 21 09:14:12 2011] XMMSAS src. selection expression = ellipse(23961.808746, 24401.606384, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Dec 21 09:14:12 2011] Writing source region out to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5_src.reg
[Wed Dec 21 09:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0083280201_pi300-10000_cl_sm2.00.img.gz, (163, 169) - (388, 394)
[Wed Dec 21 09:14:12 2011] XMMSAS bgd. selection expression = annulus(23961.808746, 24401.606384, 9787.500000, 19575.000000, X, Y) && !ellipse(24855.924600, 24338.644480, 3330.624096, 3330.624096, 0.000000, X, Y) && !ellipse(13688.908325, 31596.964111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15090.449173, 12579.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25489.887700, 8699.915000, 1222.728035, 1222.728035, 0.000000, X, Y) && !ellipse(25275.847800, 15853.546000, 1196.792034, 1196.792034, 0.000000, X, Y) && !ellipse(25416.355400, 10795.062000, 1102.680032, 1102.680032, 0.000000, X, Y)
[Wed Dec 21 09:14:12 2011] Writing fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5.gif
[Wed Dec 21 09:35:51 2011] Mean detx,y = (58.80, -83.05) 
[Wed Dec 21 09:36:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 09:53:02 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 09:53:03 2011] Setting source spectrum file to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 21 09:53:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Dec 21 10:10:45 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 21 10:10:45 2011] rmf not generated due to insufficient counts
[Wed Dec 21 14:09:35 2011] Updating aperture counts using extracted products
[Wed Dec 21 14:09:35 2011] Error reading totcts from fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Dec 21 14:09:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 14:09:36 2011] Using photon index=1.80, rate=0.671, arf fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src5.arf
[Wed Dec 21 14:09:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 14:09:36 2011] Updating source flux to 7.6e-12
[Wed Dec 21 14:12:50 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting