[Tue Dec 20 22:52:58 2011] Detection parameters:
  Position = (289.8, 200.3) = 17 3 55.30 -37 56 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.6 +/- 16.5
  Background counts = 57.6
  Rate = 0.007 +/- 0.0009

[Tue Dec 20 22:52:59 2011] Off-axis axis estimate = 7.14'
[Wed Dec 21 01:27:12 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:27:12 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Wed Dec 21 01:27:12 2011] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.766
[Wed Dec 21 01:27:12 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 10.00"
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4.csv
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4.csv
[Wed Dec 21 04:23:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Dec 21 04:23:42 2011] Fit fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Dec 21 04:24:04 2011] Spatial fit model total counts = 529.620000, observed total counts = 564.000000
[Wed Dec 21 04:24:04 2011] Offset between fit and detection position for source 23 = 1.653370 pixels
[Wed Dec 21 04:24:04 2011] 489.906000 total counts/ 309.422000 bgd. counts: snr = 10.260372
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.653370 pixels
  Position = (291.3, 201.0) = 17 3 54.75 -37 56 22.3
  Extent = 8.7 (7.3-11.1)", rotation angle = 0
  Source counts = 180.5 +/- 22.1
  Background counts = 309.4
  Rate = 0.006 +/- 0.0007
[Wed Dec 21 04:24:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:24:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:24:04 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:24:04 2011] Source does appear to be extended
[Wed Dec 21 04:24:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 07:08:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:08:56 2011] Initial guess for spatial extent in simple fitting = 8.74"
[Wed Dec 21 07:08:56 2011] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.913
[Wed Dec 21 07:08:56 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 8.74"
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4.csv
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4.csv
[Wed Dec 21 08:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Dec 21 08:13:56 2011] Fit fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Dec 21 08:14:15 2011] Spatial fit model total counts = 486.940000, observed total counts = 533.000000
[Wed Dec 21 08:14:15 2011] Offset between fit and detection position for source 23 = 0.243392 pixels
[Wed Dec 21 08:14:15 2011] 450.948000 total counts/ 292.693000 bgd. counts: snr = 9.250203
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.243392 pixels
  Position = (291.1, 201.0) = 17 3 54.84 -37 56 22.1
  Extent = 8.1 (7.0-9.4)", rotation angle = 0
  Source counts = 158.3 +/- 21.2
  Background counts = 292.7
  Rate = 0.005 +/- 0.0007
[Wed Dec 21 08:14:15 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 08:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 08:14:15 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 08:14:15 2011] Source does appear to be extended
[Wed Dec 21 08:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 08:14:15 2011] Deleting source due to low Poisson probability 0.9