[Tue Dec 20 22:52:57 2011] Detection parameters:
  Position = (286.0, 280.1) = 17 3 56.71 -37 50 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 913488.2 +/- 919.7
  Background counts = 45.3
  Rate = 3e+01 +/- 0.03

[Tue Dec 20 22:52:59 2011] Off-axis axis estimate = 1.61'
[Wed Dec 21 01:27:12 2011] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 01:27:12 2011] Initial guess for spatial extent in simple fitting = 7.23"
[Wed Dec 21 01:27:12 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Wed Dec 21 01:27:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 21 04:23:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1.csv
[Wed Dec 21 04:23:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 21 04:23:42 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 21 04:23:42 2011] Fit fullrun_mos2_xmm0083280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 21 04:24:04 2011] Spatial fit model total counts = 1158580.000000, observed total counts = 1165169.000000
[Wed Dec 21 04:24:04 2011] Offset between fit and detection position for source 1 = 0.268728 pixels
[Wed Dec 21 04:24:04 2011] 1159230.000000 total counts/ 25600.000000 bgd. counts: snr = 7085.187500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.268728 pixels
  Position = (286.1, 280.3) = 17 3 56.65 -37 50 37.5
  Extent = 12.6 (12.6-12.7)", rotation angle = 0
  Source counts = 1133630.0 +/- 1076.7
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Wed Dec 21 04:24:04 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 04:24:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 04:24:04 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 04:24:04 2011] Source does appear to be extended
[Wed Dec 21 04:24:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 07:08:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:08:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 07:08:56 2011] Initial guess for spatial extent in simple fitting = 12.65"
[Wed Dec 21 07:08:56 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Wed Dec 21 07:08:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 12.65"
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 21 08:13:56 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1.csv
[Wed Dec 21 08:13:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 21 08:13:56 2011] fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 21 08:13:56 2011] Fit fullrun_mos2_xmm0083280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 21 08:14:15 2011] Spatial fit model total counts = 1266150.000000, observed total counts = 1305788.000000
[Wed Dec 21 08:14:15 2011] Offset between fit and detection position for source 1 = 0.120587 pixels
[Wed Dec 21 08:14:15 2011] 1254480.000000 total counts/ 52900.000000 bgd. counts: snr = 5224.260870
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.120587 pixels
  Position = (286.3, 280.3) = 17 3 56.60 -37 50 37.3
  Extent = 13.9 (13.9-13.9)", rotation angle = 0
  Source counts = 1201580.0 +/- 1120.0
  Background counts = 52900.0
  Rate = 4e+01 +/- 0.03
[Wed Dec 21 08:14:15 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 08:14:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 08:14:15 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 08:14:15 2011] Source does appear to be extended
[Wed Dec 21 08:14:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 09:14:12 2011] Counts = 1201580.000000, rescaling region sizes by 3.000000
[Wed Dec 21 09:14:12 2011] XMMSAS src. selection expression = ellipse(24855.924600, 24338.644480, 2497.968072, 2497.968072, 0.000000, X, Y)
[Wed Dec 21 09:14:12 2011] Writing source region out to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 21 09:14:12 2011] Extracting stamp from image fullrun_mos2_xmm0083280201_pi300-10000_cl_sm2.00.img.gz, (143, 137) - (430, 424)
[Wed Dec 21 09:14:12 2011] XMMSAS bgd. selection expression = annulus(24855.924600, 24338.644480, 12489.840359, 24979.680719, X, Y) && !ellipse(23961.808746, 24401.606384, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(13688.908325, 31596.964111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15090.449173, 12579.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25489.887700, 8699.915000, 1222.728035, 1222.728035, 0.000000, X, Y) && !ellipse(25275.847800, 15853.546000, 1196.792034, 1196.792034, 0.000000, X, Y) && !ellipse(25416.355400, 10795.062000, 1102.680032, 1102.680032, 0.000000, X, Y)
[Wed Dec 21 09:14:12 2011] Writing fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1.gif
[Wed Dec 21 09:16:34 2011] Mean detx,y = (61.33, -81.48) 
[Wed Dec 21 09:16:50 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 09:33:42 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 09:33:43 2011] Setting source spectrum file to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 09:33:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Dec 21 14:09:35 2011] Updating aperture counts using extracted products
[Wed Dec 21 14:09:35 2011] Error reading totcts from fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 21 14:09:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 14:09:35 2011] Using photon index=1.80, rate=36.9, arf fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 14:09:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 14:09:36 2011] Updating source flux to 4.3e-10
[Wed Dec 21 14:14:42 2011] Reading fit data from xmm0083280201/analysis//spectral/fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Dec 21 14:14:42 2011] Spectral fit parameter nH value = 1.52377e+22
[Wed Dec 21 14:14:42 2011] Spectral fit parameter PhoIndex value = 0.656494
[Wed Dec 21 14:14:42 2011] Failed to get F(0.3-8.0) from xmm0083280201/analysis//spectral/fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Dec 21 14:14:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 14:14:42 2011] Using Nh = 1.5e+22, photon index=0.66, rate=36.9, arf fullrun_mos2_xmm0083280201_pi300-10000_pass1_cl_src1.arf
[Wed Dec 21 14:14:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 14:14:42 2011] Updating source flux to 1e-09