[Thu Feb 16 19:44:01 2012] Detection parameters:
  Position = (275.5, 281.9) = 17 4 0.54 -37 50 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5119.1 +/- 131.8
  Background counts = 30.3
  Rate = 0.3 +/- 0.006

[Thu Feb 16 19:44:02 2012] Off-axis axis estimate = 2.05'
[Thu Feb 16 20:07:12 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 20:07:12 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Feb 16 20:07:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.714
[Thu Feb 16 20:07:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.45"
[Thu Feb 16 21:01:18 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Feb 16 21:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2.csv
[Thu Feb 16 21:01:18 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Feb 16 21:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2.csv
[Thu Feb 16 21:01:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 21:01:18 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Feb 16 21:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Feb 16 21:01:18 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Feb 16 21:01:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu Feb 16 21:01:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 21:01:25 2012] Source 2 is offset by -6.350286 and 0.895798 pixels which is larger than
2 X fitted extent = 2.943462 x 2.943462, not incorporating fit results
[Thu Feb 16 21:01:25 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 21:01:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 21:01:25 2012] Assessing source extent using major
[Thu Feb 16 21:01:25 2012] Source does appear to be extended
[Thu Feb 16 21:01:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 21:16:14 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 21:16:14 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Thu Feb 16 21:16:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.714
[Thu Feb 16 21:16:14 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.45"
[Thu Feb 16 21:30:04 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Feb 16 21:30:04 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Feb 16 21:30:04 2012] Fit fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_src2 appears to have run properly
[Thu Feb 16 21:30:04 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Feb 16 21:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Feb 16 21:30:04 2012] fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Feb 16 21:30:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Feb 16 21:30:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 21:30:08 2012] Source 2 is offset by -6.350286 and 2.616262 pixels which is larger than
2 X fitted extent = 3.354014 x 3.354014, not incorporating fit results
[Thu Feb 16 21:30:08 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 21:30:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 21:30:08 2012] Assessing source extent using major
[Thu Feb 16 21:30:08 2012] Source does appear to be extended
[Thu Feb 16 21:30:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 21:34:33 2012] Counts = 5119.109375, rescaling region sizes by 2.000000
[Thu Feb 16 21:34:33 2012] XMMSAS src. selection expression = ellipse(23920.345154, 24474.686066, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Feb 16 21:34:33 2012] Writing source region out to fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2_src.reg
[Thu Feb 16 21:34:33 2012] Extracting stamp from image fullrun_mos2_xmm0083280101_pi300-10000_cl_sm2.00.img.gz, (201, 207) - (351, 357)
[Thu Feb 16 21:34:33 2012] XMMSAS bgd. selection expression = annulus(23920.345154, 24474.686066, 4350.000000, 8700.000000, X, Y) && !ellipse(24824.191800, 24345.307200, 2685.576077, 2685.576077, 0.000000, X, Y)
[Thu Feb 16 21:34:33 2012] Writing fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2.gif
[Thu Feb 16 21:45:04 2012] Mean detx,y = (-28.45, -108.07) 
[Thu Feb 16 21:45:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 21:47:26 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 21:47:26 2012] Setting source spectrum file to fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 21:47:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Feb 16 21:51:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 21:51:50 2012] rmf not generated due to insufficient counts
[Thu Feb 16 22:20:18 2012] Updating aperture counts using extracted products
[Thu Feb 16 22:20:18 2012] Error reading totcts from fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Feb 16 22:20:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 22:20:18 2012] Using photon index=1.80, rate=0.252, arf fullrun_mos2_xmm0083280101_pi300-10000_pass1_cl_src2.arf
[Thu Feb 16 22:20:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 22:20:18 2012] Updating source flux to 3.3e-12
[Thu Feb 16 22:20:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting