[Thu Feb 16 19:43:40 2012] Detection parameters:
  Position = (287.3, 193.1) = 17 3 56.23 -37 56 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 12.1
  Background counts = 33.5
  Rate = 0.003 +/- 0.0007

[Thu Feb 16 19:43:40 2012] Off-axis axis estimate = 7.68'
[Thu Feb 16 19:45:34 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 19:45:34 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu Feb 16 19:45:34 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Thu Feb 16 19:45:34 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.27"
[Thu Feb 16 20:07:12 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Feb 16 20:07:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 16 20:07:12 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Feb 16 20:07:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 16 20:07:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 20:07:12 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Feb 16 20:07:12 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Feb 16 20:07:12 2012] Fit fullrun_mos1_xmm0083280101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Feb 16 21:01:22 2012] Source 11 is offset by 1.845114 and 0.023988 pixels which is larger than
2 X fitted extent = 1.452446 x 1.452446, not incorporating fit results
[Thu Feb 16 21:01:22 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 21:01:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 21:01:22 2012] Assessing source extent using major
[Thu Feb 16 21:01:22 2012] Source does appear to be extended
[Thu Feb 16 21:01:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 21:01:28 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 21:01:28 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu Feb 16 21:01:28 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Thu Feb 16 21:01:28 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.27"
[Thu Feb 16 21:16:14 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10.ximg exists
[Thu Feb 16 21:16:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10.csv
[Thu Feb 16 21:16:14 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Feb 16 21:16:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10.csv
[Thu Feb 16 21:16:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 21:16:14 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Feb 16 21:16:14 2012] fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Feb 16 21:16:14 2012] Fit fullrun_mos1_xmm0083280101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Feb 16 21:30:07 2012] Source 11 is offset by 5.040039 and 8.589278 pixels which is larger than
2 X fitted extent = 1.180083 x 1.180083, not incorporating fit results
[Thu Feb 16 21:30:07 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 21:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 21:30:07 2012] Assessing source extent using major
[Thu Feb 16 21:30:07 2012] Source does appear to be extended
[Thu Feb 16 21:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 21:30:11 2012] XMMSAS src. selection expression = ellipse(24942.701355, 16755.467163, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 21:30:11 2012] Writing source region out to fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11_src.reg
[Thu Feb 16 21:30:11 2012] Extracting stamp from image fullrun_mos1_xmm0083280101_pi300-10000_cl_sm2.00.img.gz, (250, 156) - (325, 231)
[Thu Feb 16 21:30:11 2012] XMMSAS bgd. selection expression = annulus(24942.701355, 16755.467163, 1087.500000, 2175.000000, X, Y) && !ellipse(25307.415800, 13807.008000, 1363.608039, 228.453607, 291.699000, X, Y)
[Thu Feb 16 21:30:11 2012] Writing fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11.gif
[Thu Feb 16 21:32:32 2012] Mean detx,y = (7683.97, -64.40) 
[Thu Feb 16 21:32:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 21:32:49 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 21:32:49 2012] Setting source spectrum file to fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb 16 21:32:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Feb 16 21:34:14 2012] Not generating rmf since there are only 50 counts
[Thu Feb 16 21:34:14 2012] rmf not generated due to insufficient counts
[Thu Feb 16 22:20:17 2012] Updating aperture counts using extracted products
[Thu Feb 16 22:20:17 2012] Error reading totcts from fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Feb 16 22:20:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 16 22:20:18 2012] Using photon index=1.80, rate=0.00292, arf fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11.arf
[Thu Feb 16 22:20:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Feb 16 22:20:18 2012] Updating source flux to 4.8e-14
[Thu Feb 16 22:20:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Feb 16 22:20:19 2012] xmm0083280101/analysis//spectral/fullrun_mos1_xmm0083280101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete