[Tue Jun 12 00:50:32 2012] Detection parameters:
  Position = (311.8, 332.1) = 18 56 1.47 1 18 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 315.5 +/- 31.3
  Background counts = 651.7
  Rate = 0.02 +/- 0.002

[Tue Jun 12 00:50:33 2012] Off-axis axis estimate = 2.62'
[Tue Jun 12 00:54:41 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:54:41 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Jun 12 00:54:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Tue Jun 12 00:54:41 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 7.74"
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58.csv
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58_1.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58.csv
[Tue Jun 12 04:32:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 04:33:01 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Tue Jun 12 04:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Tue Jun 12 04:33:01 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Tue Jun 12 04:33:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Tue Jun 12 04:33:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:18 2012] Spatial fit model total counts = 4730.320000, observed total counts = 3990.000000
[Tue Jun 12 09:08:18 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 09:08:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:18 2012] Assessing source extent using major
[Tue Jun 12 09:08:18 2012] Source does appear to be extended
[Tue Jun 12 09:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:18 2012] Source is confused with source 6
[Tue Jun 12 09:08:53 2012] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 09:08:53 2012] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Jun 12 09:08:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.962
[Tue Jun 12 09:08:53 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 7.74"
[Tue Jun 12 13:38:32 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src51.ximg exists
[Tue Jun 12 13:38:32 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src51_1.ximg exists
[Tue Jun 12 13:38:32 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src51 appears to have run properly
[Tue Jun 12 13:38:34 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Tue Jun 12 13:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51.csv
[Tue Jun 12 13:38:34 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Tue Jun 12 13:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51.csv
[Tue Jun 12 13:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:21 2012] Warning, spatial fit 51 centroid is now closest to src. 6
[Tue Jun 12 20:29:22 2012] Source 68 is offset by -6.217313 and 3.068369 pixels which is larger than
2 X fitted extent = 1.629435 x 1.629435, not incorporating fit results
[Tue Jun 12 20:29:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:22 2012] Assessing source extent using major
[Tue Jun 12 20:29:22 2012] Source does appear to be extended
[Tue Jun 12 20:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:30:08 2012] XMMSAS src. selection expression = ellipse(27076.245728, 28841.102112, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 20:30:08 2012] Writing source region out to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68_src.reg
[Tue Jun 12 20:30:08 2012] Extracting stamp from image fullrun_pn_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (274, 295) - (349, 370)
[Tue Jun 12 20:30:08 2012] XMMSAS bgd. selection expression = annulus(27076.245728, 28841.102112, 1087.500000, 2175.000000, X, Y) && !ellipse(24524.534241, 30766.893097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28117.973022, 30836.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.309692, 28810.664856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.583954, 31806.995514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26297.874000, 31127.604000, 1365.872039, 1365.872039, 0.000000, X, Y) && !ellipse(27353.616000, 30319.524000, 1110.600032, 1110.600032, 0.000000, X, Y) && !ellipse(26704.053101, 30913.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.888000, 30529.708000, 555.300016, 555.300016, 0.000000, X, Y) && !ellipse(25898.251709, 30515.087463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28186.839172, 30449.027679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.443451, 27966.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.835846, 28006.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25867.580811, 28012.786072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.157379, 27580.090637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28871.921692, 27436.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.745600, 27356.345800, 487.239214, 487.239214, 0.000000, X, Y) && !ellipse(26471.415200, 27410.512600, 1134.088033, 1134.088033, 0.000000, X, Y) && !ellipse(27550.213593, 27449.200348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28025.450562, 26948.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29071.648926, 26645.945129, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 20:30:08 2012] Writing fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68.gif
[Tue Jun 12 21:11:10 2012] Mean detx,y = (-185.61, -1611.61) 
[Tue Jun 12 21:11:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 21:11:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 21:11:33 2012] Setting source spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jun 12 21:11:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Jun 12 22:06:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 12 22:06:11 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:10 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:10 2012] Error reading totcts from fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Wed Jun 13 03:01:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:13 2012] Using photon index=1.80, rate=0.0175, arf fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src68.arf
[Wed Jun 13 03:01:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:13 2012] Updating source flux to 4.8e-14
[Wed Jun 13 03:14:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting