[Tue Jun 12 00:50:32 2012] Detection parameters:
  Position = (302.7, 357.9) = 18 56 4.10 1 20 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 380.4 +/- 41.6
  Background counts = 602.7
  Rate = 0.02 +/- 0.002

[Tue Jun 12 00:50:33 2012] Off-axis axis estimate = 4.32'
[Tue Jun 12 00:54:41 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:54:41 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Tue Jun 12 00:54:41 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Tue Jun 12 00:54:41 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 8.59"
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46.csv
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46.csv
[Tue Jun 12 04:32:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 04:33:01 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue Jun 12 04:33:01 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue Jun 12 04:33:01 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue Jun 12 09:08:18 2012] Spatial fit model total counts = 3219.070000, observed total counts = 3854.000000
[Tue Jun 12 09:08:18 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 09:08:18 2012] Spatial fit model total counts = 5437.470000, observed total counts = 5436.000000
[Tue Jun 12 09:08:18 2012] Offset between fit and detection position for source 55 = 1.959108 pixels
[Tue Jun 12 09:08:18 2012] 5423.957000 total counts/ 4977.370000 bgd. counts: snr = 6.330035
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 1.959108 pixels
  Position = (300.7, 358.0) = 18 56 4.67 1 20 13.6
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 446.6 +/- 73.6
  Background counts = 4977.4
  Rate = 0.03 +/- 0.005
[Tue Jun 12 09:08:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:18 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:08:18 2012] Source does appear to be extended
[Tue Jun 12 09:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:18 2012] Source is confused with source 48
[Tue Jun 12 09:08:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 09:08:53 2012] Initial guess for spatial extent in simple fitting = 17.18"
[Tue Jun 12 09:08:53 2012] source mask rpix=3.9, npix_max = 79, mask sum = 72, frac = 0.909
[Tue Jun 12 09:08:53 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 17.18"
[Tue Jun 12 13:38:32 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jun 12 13:38:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40.csv
[Tue Jun 12 13:38:32 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jun 12 13:38:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40.csv
[Tue Jun 12 13:38:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 13:38:34 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jun 12 13:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue Jun 12 13:38:34 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jun 12 13:38:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Tue Jun 12 13:38:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:21 2012] Warning, spatial fit 40 centroid is now closest to src. 57
[Tue Jun 12 20:29:21 2012] Spatial fit model total counts = 5790.020000, observed total counts = 5788.000000
[Tue Jun 12 20:29:21 2012] Offset between fit and detection position for source 55 = 2.129468 pixels
[Tue Jun 12 20:29:21 2012] Warning, changing simple spatial fit ID from 40 to 43
[Tue Jun 12 20:29:21 2012] 5706.046000 total counts/ 5054.240000 bgd. counts: snr = 9.168334
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.129468 pixels
  Position = (302.8, 358.3) = 18 56 4.07 1 20 15.2
  Extent = 17.1 (17.0-34.1)", rotation angle = 0
  Source counts = 651.8 +/- 75.5
  Background counts = 5054.2
  Rate = 0.04 +/- 0.005
[Tue Jun 12 20:29:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:22 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:22 2012] Source does appear to be extended
[Tue Jun 12 20:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:30:07 2012] XMMSAS src. selection expression = ellipse(26297.874000, 31127.604000, 1024.404029, 1024.404029, 0.000000, X, Y)
[Tue Jun 12 20:30:07 2012] Writing source region out to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55_src.reg
[Tue Jun 12 20:30:07 2012] Extracting stamp from image fullrun_pn_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (244, 299) - (362, 417)
[Tue Jun 12 20:30:07 2012] XMMSAS bgd. selection expression = annulus(26297.874000, 31127.604000, 1707.340049, 3414.680098, X, Y) && !ellipse(24524.534241, 30766.893097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.997345, 35369.471344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.703674, 33878.940552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28117.973022, 30836.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.309692, 28810.664856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.698000, 35815.506000, 1786.992051, 1786.992051, 0.000000, X, Y) && !ellipse(29651.376000, 35075.004000, 1696.928049, 1696.928049, 0.000000, X, Y) && !ellipse(24564.917236, 33100.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.583954, 31806.995514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23053.887800, 31298.062000, 1420.040041, 1420.040041, 0.000000, X, Y) && !ellipse(27353.616000, 30319.524000, 1110.600032, 1110.600032, 0.000000, X, Y) && !ellipse(26704.053101, 30913.195831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22053.410000, 30984.538000, 2840.080082, 2840.080082, 0.000000, X, Y) && !ellipse(27137.888000, 30529.708000, 555.300016, 555.300016, 0.000000, X, Y) && !ellipse(25898.251709, 30515.087463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22335.467896, 30676.412354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28186.839172, 30449.027679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27076.245728, 28841.102112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.443451, 27966.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.835846, 28006.344971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25867.580811, 28012.786072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29413.157379, 27580.090637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28871.921692, 27436.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.745600, 27356.345800, 487.239214, 487.239214, 0.000000, X, Y) && !ellipse(26471.415200, 27410.512600, 1134.088033, 1134.088033, 0.000000, X, Y) && !ellipse(27550.213593, 27449.200348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28025.450562, 26948.889282, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 20:30:07 2012] Writing fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55.gif
[Tue Jun 12 20:56:50 2012] Mean detx,y = (-1116.22, -3714.16) 
[Tue Jun 12 20:56:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 20:57:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 20:57:11 2012] Setting source spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Tue Jun 12 20:57:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed Jun 13 03:01:10 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:10 2012] Error reading totcts from fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed Jun 13 03:01:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:12 2012] Using photon index=1.80, rate=0.042, arf fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src55.arf
[Wed Jun 13 03:01:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:12 2012] Updating source flux to 1.3e-13
[Wed Jun 13 03:14:14 2012] Flag p found in src. 55 procflags, skipping spectral fitting
[Wed Jun 13 03:14:14 2012] Flag c found in src. 55 procflags, skipping spectral fitting