[Tue Jun 12 00:50:32 2012] Detection parameters:
  Position = (319.7, 422.9) = 18 55 59.17 1 24 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.6 +/- 30.3
  Background counts = 372.5
  Rate = 0.01 +/- 0.002

[Tue Jun 12 00:50:33 2012] Off-axis axis estimate = 9.15'
[Tue Jun 12 00:54:41 2012] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:54:41 2012] Initial guess for spatial extent in simple fitting = 11.01"
[Tue Jun 12 00:54:41 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.980
[Tue Jun 12 00:54:41 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.01"
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src23.ximg exists
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Jun 12 04:32:59 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src23 appears to have run properly
[Tue Jun 12 04:33:00 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Jun 12 04:33:00 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Jun 12 04:33:00 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Jun 12 09:08:18 2012] Spatial fit model total counts = 4370.350000, observed total counts = 4362.000000
[Tue Jun 12 09:08:18 2012] Offset between fit and detection position for source 30 = 2.563147 pixels
[Tue Jun 12 09:08:18 2012] Warning, changing simple spatial fit ID from 23 to 18
[Tue Jun 12 09:08:18 2012] 4367.607000 total counts/ 4099.070000 bgd. counts: snr = 4.194319
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.563147 pixels
  Position = (322.3, 423.1) = 18 55 58.43 1 24 56.7
  Extent = 22.6 (22.5-22.7)", rotation angle = 0
  Source counts = 268.5 +/- 66.1
  Background counts = 4099.1
  Rate = 0.02 +/- 0.004
[Tue Jun 12 09:08:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:18 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:08:18 2012] Source does appear to be extended
[Tue Jun 12 09:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:18 2012] Source is confused with source 2
[Tue Jun 12 09:08:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 09:08:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 09:08:53 2012] Initial guess for spatial extent in simple fitting = 22.61"
[Tue Jun 12 09:08:53 2012] source mask rpix=5.2, npix_max = 129, mask sum = 130, frac = 1.001
[Tue Jun 12 09:08:53 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 22.61"
[Tue Jun 12 13:38:31 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jun 12 13:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20.csv
[Tue Jun 12 13:38:31 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jun 12 13:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20.csv
[Tue Jun 12 13:38:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 13:38:33 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jun 12 13:38:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Tue Jun 12 13:38:33 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jun 12 13:38:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Tue Jun 12 13:38:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:21 2012] Warning, spatial fit 20 centroid is now closest to src. 25
[Tue Jun 12 20:29:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:22 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:22 2012] Source does appear to be extended
[Tue Jun 12 20:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:30:06 2012] XMMSAS src. selection expression = ellipse(27988.962000, 36758.282000, 1356.858039, 1356.858039, 0.000000, X, Y)
[Tue Jun 12 20:30:06 2012] Writing source region out to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30_src.reg
[Tue Jun 12 20:30:06 2012] Extracting stamp from image fullrun_pn_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (244, 345) - (400, 501)
[Tue Jun 12 20:30:07 2012] XMMSAS bgd. selection expression = annulus(27988.962000, 36758.282000, 2261.430065, 4522.860130, X, Y) && !ellipse(28540.977600, 35966.837006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.997345, 35369.471344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24748.703674, 33878.940552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25221.078522, 37560.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.397003, 41986.712372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30565.679047, 41087.100830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30160.649017, 40920.516327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27553.535034, 40845.763977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28658.085632, 40771.316956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26944.436798, 40669.780670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.713043, 40572.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28570.124512, 40152.140228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.471680, 39718.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.327850, 39876.240204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.960571, 37948.418121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27519.359497, 37608.975281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.709198, 37087.546112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.039917, 36671.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.962600, 36790.031000, 932.960027, 932.960027, 0.000000, X, Y) && !ellipse(29201.748016, 36654.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32291.541016, 36420.706299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30086.998505, 35959.286102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.318329, 35438.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.698000, 35815.506000, 1786.992051, 1786.992051, 0.000000, X, Y) && !ellipse(29651.376000, 35075.004000, 1696.928049, 1696.928049, 0.000000, X, Y) && !ellipse(33350.857880, 33815.161438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32305.020599, 33440.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.917236, 33100.701019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32615.517400, 32812.916000, 1658.672048, 1658.672048, 0.000000, X, Y) && !ellipse(25991.583954, 31806.995514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26297.874000, 31127.604000, 1365.872039, 1365.872039, 0.000000, X, Y) && !ellipse(23053.887800, 31298.062000, 1420.040041, 1420.040041, 0.000000, X, Y) && !ellipse(22053.410000, 30984.538000, 2840.080082, 2840.080082, 0.000000, X, Y)
[Tue Jun 12 20:30:07 2012] Writing fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30.gif
[Tue Jun 12 20:44:09 2012] Mean detx,y = (4.44, -9458.30) 
[Tue Jun 12 20:44:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 20:44:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 20:44:56 2012] Setting source spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jun 12 20:44:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 13 03:01:10 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:10 2012] Error reading totcts from fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 13 03:01:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:11 2012] Using photon index=1.80, rate=0.0173, arf fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src30.arf
[Wed Jun 13 03:01:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:11 2012] Updating source flux to 7e-14
[Wed Jun 13 03:14:14 2012] Flag c found in src. 30 procflags, skipping spectral fitting