[Tue Jun 12 00:50:32 2012] Detection parameters:
  Position = (316.9, 432.8) = 18 55 59.99 1 25 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.1 +/- 28.4
  Background counts = 326.0
  Rate = 0.006 +/- 0.001

[Tue Jun 12 00:50:33 2012] Off-axis axis estimate = 9.84'
[Tue Jun 12 00:54:41 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 00:54:41 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Tue Jun 12 00:54:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Tue Jun 12 00:54:41 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.35"
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18.csv
[Tue Jun 12 04:32:59 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jun 12 04:32:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18.csv
[Tue Jun 12 04:32:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 04:33:00 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jun 12 04:33:00 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jun 12 04:33:00 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Jun 12 09:08:18 2012] Warning, spatial fit 18 centroid is now closest to src. 30
[Tue Jun 12 09:08:18 2012] Spatial fit model total counts = 3893.530000, observed total counts = 3219.000000
[Tue Jun 12 09:08:18 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 09:08:18 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:18 2012] Assessing source extent using major
[Tue Jun 12 09:08:18 2012] Source does appear to be extended
[Tue Jun 12 09:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:18 2012] Source is confused with source 30
[Tue Jun 12 09:08:53 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 09:08:53 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Tue Jun 12 09:08:53 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Tue Jun 12 09:08:53 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.35"
[Tue Jun 12 13:38:31 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 12 13:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 12 13:38:31 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 12 13:38:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15.csv
[Tue Jun 12 13:38:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 13:38:33 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 12 13:38:33 2012] fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 12 13:38:33 2012] Fit fullrun_pn_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jun 12 20:29:21 2012] Warning, spatial fit 15 centroid is now closest to src. 26
[Tue Jun 12 20:29:21 2012] Spatial fit model total counts = 11030.300000, observed total counts = 9907.000000
[Tue Jun 12 20:29:21 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 20:29:22 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:22 2012] Assessing source extent using major
[Tue Jun 12 20:29:22 2012] Source does appear to be extended
[Tue Jun 12 20:29:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:30:06 2012] XMMSAS src. selection expression = ellipse(27519.359497, 37608.975281, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 20:30:06 2012] Writing source region out to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25_src.reg
[Tue Jun 12 20:30:06 2012] Extracting stamp from image fullrun_pn_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (279, 395) - (354, 470)
[Tue Jun 12 20:30:06 2012] XMMSAS bgd. selection expression = annulus(27519.359497, 37608.975281, 1087.500000, 2175.000000, X, Y) && !ellipse(28540.977600, 35966.837006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.997345, 35369.471344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25221.078522, 37560.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29237.713043, 40572.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28570.124512, 40152.140228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.471680, 39718.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.327850, 39876.240204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.960571, 37948.418121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28217.709198, 37087.546112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29620.039917, 36671.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30113.962600, 36790.031000, 932.960027, 932.960027, 0.000000, X, Y) && !ellipse(29201.748016, 36654.964844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.962000, 36758.282000, 1809.144052, 1809.144052, 0.000000, X, Y) && !ellipse(30086.998505, 35959.286102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.318329, 35438.268463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.698000, 35815.506000, 1786.992051, 1786.992051, 0.000000, X, Y) && !ellipse(29651.376000, 35075.004000, 1696.928049, 1696.928049, 0.000000, X, Y)
[Tue Jun 12 20:30:06 2012] Writing fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25.gif
[Tue Jun 12 20:41:44 2012] Mean detx,y = (-546.83, -10294.45) 
[Tue Jun 12 20:41:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 20:41:58 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 20:41:58 2012] Setting source spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jun 12 20:41:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jun 12 21:32:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 12 21:32:28 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:10 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:10 2012] Error reading totcts from fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Jun 13 03:01:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:11 2012] Using photon index=1.80, rate=0.00576, arf fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25.arf
[Wed Jun 13 03:01:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:11 2012] Updating source flux to 2.8e-14
[Wed Jun 13 03:14:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 13 03:19:53 2012] xmm0083270401/analysis//spectral/fullrun_pn_xmm0083270401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete