[Tue Jun 12 00:51:25 2012] Detection parameters:
  Position = (246.2, 277.9) = 18 56 20.48 1 14 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.3 +/- 21.4
  Background counts = 128.1
  Rate = 0.005 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 4.07'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Tue Jun 12 06:11:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.46"
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41.csv
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41.csv
[Tue Jun 12 09:08:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Jun 12 09:08:02 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Tue Jun 12 09:08:35 2012] Source 79 is offset by 0.919128 and 5.893672 pixels which is larger than
2 X fitted extent = 1.001402 x 1.001402, not incorporating fit results
[Tue Jun 12 09:08:35 2012] Warning, spatial fit 41 centroid is now closest to src. 73
[Tue Jun 12 09:08:35 2012] Source 79 is offset by -6.291127 and 1.094638 pixels which is larger than
2 X fitted extent = 0.958533 x 0.958533, not incorporating fit results
[Tue Jun 12 09:08:35 2012] Spatial fit model total counts = 1783.510000, observed total counts = 1779.000000
[Tue Jun 12 09:08:35 2012] Offset between fit and detection position for source 79 = 6.253231 pixels
[Tue Jun 12 09:08:35 2012] Warning, changing simple spatial fit ID from 41 to 78
[Tue Jun 12 09:08:35 2012] 1809.166000 total counts/ 1675.440000 bgd. counts: snr = 3.267017
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 6.253231 pixels
  Position = (245.9, 271.6) = 18 56 20.58 1 13 58.0
  Extent = 16.9 (16.9-33.9)", rotation angle = 0
  Source counts = 133.7 +/- 42.5
  Background counts = 1675.4
  Rate = 0.005 +/- 0.002
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:36 2012] Source is confused with source 80
[Tue Jun 12 16:05:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 16.93"
[Tue Jun 12 16:05:32 2012] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.933
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 16.93"
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38.csv
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38_1.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38.csv
[Tue Jun 12 20:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Tue Jun 12 20:28:59 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 4279.000000, observed total counts = 4205.000000
[Tue Jun 12 20:29:47 2012] Offset between fit and detection position for source 79 = 1.876131 pixels
[Tue Jun 12 20:29:47 2012] 4292.808000 total counts/ 4041.820000 bgd. counts: snr = 3.947885
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.876131 pixels
  Position = (247.7, 271.3) = 18 56 20.05 1 13 56.5
  Extent = 20.0 (4.7-33.9)", rotation angle = 0
  Source counts = 251.0 +/- 65.5
  Background counts = 4041.8
  Rate = 0.009 +/- 0.002
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 23:38:37 2012] XMMSAS src. selection expression = ellipse(21504.661200, 23552.959800, 1199.418035, 1199.418035, 0.000000, X, Y)
[Tue Jun 12 23:38:37 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79_src.reg
[Tue Jun 12 23:38:37 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (179, 202) - (317, 340)
[Tue Jun 12 23:38:37 2012] XMMSAS bgd. selection expression = annulus(21504.661200, 23552.959800, 1999.030058, 3998.060115, X, Y) && !ellipse(21153.400000, 25822.688000, 1308.976038, 1308.976038, 0.000000, X, Y) && !ellipse(20576.066269, 24837.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24291.120200, 22905.276800, 264.218408, 264.218408, 0.000000, X, Y) && !ellipse(19883.366000, 25790.722000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(21893.458000, 25111.335000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(20676.419739, 24306.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.364655, 20366.160980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20799.591858, 26833.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.222076, 28050.306946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21328.814000, 23559.636000, 1354.304039, 1354.304039, 0.000000, X, Y) && !ellipse(22023.534000, 24768.280000, 1319.328038, 1319.328038, 0.000000, X, Y) && !ellipse(21039.687485, 27503.009827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19070.132000, 25177.604000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(19944.700302, 26650.987030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26017.610600, 27578.016800, 1116.632032, 1116.632032, 0.000000, X, Y) && !ellipse(21727.957367, 26309.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.946000, 25553.939400, 2978.928086, 2978.928086, 0.000000, X, Y) && !ellipse(18750.354000, 25321.626000, 1489.464043, 1489.464043, 0.000000, X, Y) && !ellipse(22003.897000, 24343.916000, 1231.192035, 1231.192035, 0.000000, X, Y) && !ellipse(22469.330320, 25314.032000, 1156.536033, 1156.536033, 0.000000, X, Y) && !ellipse(26003.840000, 28126.846200, 760.548822, 760.548822, 0.000000, X, Y) && !ellipse(20876.908966, 23266.461884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24436.332400, 23977.970000, 1201.232035, 1201.232035, 0.000000, X, Y) && !ellipse(22042.906235, 23459.771912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20120.471207, 24567.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23326.900970, 23174.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22369.952000, 24565.976000, 2582.144074, 2582.144074, 0.000000, X, Y)
[Tue Jun 12 23:38:37 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79.gif
[Wed Jun 13 00:03:12 2012] Mean detx,y = (5322.75, -4356.74) 
[Wed Jun 13 00:03:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 00:03:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 00:03:30 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed Jun 13 00:03:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Wed Jun 13 03:01:16 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:16 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Wed Jun 13 03:01:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:17 2012] Using photon index=1.80, rate=0.00907, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src79.arf
[Wed Jun 13 03:01:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:17 2012] Updating source flux to 1.1e-13
[Wed Jun 13 03:04:00 2012] Flag b found in src. 79 procflags, skipping spectral fitting
[Wed Jun 13 03:04:00 2012] Flag c found in src. 79 procflags, skipping spectral fitting