[Tue Jun 12 00:51:25 2012] Detection parameters:
  Position = (237.1, 286.0) = 18 56 23.14 1 15 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.2 +/- 21.6
  Background counts = 123.6
  Rate = 0.01 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 4.54'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Tue Jun 12 06:11:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.720
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.70"
[Tue Jun 12 09:08:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 12 09:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2.csv
[Tue Jun 12 09:08:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 12 09:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2.csv
[Tue Jun 12 09:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Tue Jun 12 09:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:35 2012] Warning, spatial fit 2 centroid is now closest to src. 81
[Tue Jun 12 09:08:35 2012] Source 73 is offset by -1.844457 and 0.684818 pixels which is larger than
2 X fitted extent = 1.118391 x 1.118391, not incorporating fit results
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:36 2012] Source is confused with source 81
[Tue Jun 12 09:08:36 2012] Source is confused with source 77
[Tue Jun 12 16:05:32 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Tue Jun 12 16:05:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 18, frac = 0.720
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.70"
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2.csv
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2.csv
[Tue Jun 12 20:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue Jun 12 20:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 2239.450000, observed total counts = 1897.000000
[Tue Jun 12 20:29:47 2012] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 23:38:35 2012] XMMSAS src. selection expression = ellipse(20576.066269, 24837.347137, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 23:38:35 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73_src.reg
[Tue Jun 12 23:38:35 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (200, 249) - (275, 324)
[Tue Jun 12 23:38:35 2012] XMMSAS bgd. selection expression = annulus(20576.066269, 24837.347137, 1087.500000, 2175.000000, X, Y) && !ellipse(21153.400000, 25822.688000, 1308.976038, 1308.976038, 0.000000, X, Y) && !ellipse(19883.366000, 25790.722000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(21893.458000, 25111.335000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(20676.419739, 24306.205872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20799.591858, 26833.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21328.814000, 23559.636000, 1354.304039, 1354.304039, 0.000000, X, Y) && !ellipse(22023.534000, 24768.280000, 1319.328038, 1319.328038, 0.000000, X, Y) && !ellipse(21039.687485, 27503.009827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19070.132000, 25177.604000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(19944.700302, 26650.987030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21504.661200, 23552.959800, 1599.224046, 1599.224046, 0.000000, X, Y) && !ellipse(21727.957367, 26309.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.946000, 25553.939400, 2978.928086, 2978.928086, 0.000000, X, Y) && !ellipse(18750.354000, 25321.626000, 1489.464043, 1489.464043, 0.000000, X, Y) && !ellipse(22003.897000, 24343.916000, 1231.192035, 1231.192035, 0.000000, X, Y) && !ellipse(22469.330320, 25314.032000, 1156.536033, 1156.536033, 0.000000, X, Y) && !ellipse(20876.908966, 23266.461884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22042.906235, 23459.771912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20120.471207, 24567.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23326.900970, 23174.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22369.952000, 24565.976000, 2582.144074, 2582.144074, 0.000000, X, Y)
[Tue Jun 12 23:38:35 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73.gif
[Tue Jun 12 23:39:11 2012] Mean detx,y = (6321.25, -3239.60) 
[Tue Jun 12 23:39:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 23:39:27 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 23:39:27 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jun 12 23:39:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Jun 13 00:32:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 00:32:15 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:15 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:15 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jun 13 03:01:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:16 2012] Using photon index=1.80, rate=0.0109, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src73.arf
[Wed Jun 13 03:01:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:16 2012] Updating source flux to 2.2e-13
[Wed Jun 13 03:04:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting