[Tue Jun 12 00:51:24 2012] Detection parameters:
  Position = (242.4, 316.7) = 18 56 21.60 1 17 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.0 +/- 21.0
  Background counts = 141.4
  Rate = 0.006 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 4.27'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Tue Jun 12 06:11:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.57"
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30.csv
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30.csv
[Tue Jun 12 09:08:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Jun 12 09:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:35 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 11.095210 pixels away
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 16:05:32 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Tue Jun 12 16:05:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.025
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 8.57"
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27.csv
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27.csv
[Tue Jun 12 20:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Jun 12 20:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 1779.420000, observed total counts = 1483.000000
[Tue Jun 12 20:29:47 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 20:29:47 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 11.095210 pixels away
[Tue Jun 12 20:29:47 2012] Source 56 is offset by 5.176684 and 0.467745 pixels which is larger than
2 X fitted extent = 1.027035 x 1.027035, not incorporating fit results
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 23:38:36 2012] XMMSAS src. selection expression = ellipse(21039.687485, 27503.009827, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56_src.reg
[Tue Jun 12 23:38:36 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (205, 279) - (280, 354)
[Tue Jun 12 23:38:36 2012] XMMSAS bgd. selection expression = annulus(21039.687485, 27503.009827, 1087.500000, 2175.000000, X, Y) && !ellipse(21153.400000, 25822.688000, 1308.976038, 1308.976038, 0.000000, X, Y) && !ellipse(20576.066269, 24837.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19883.366000, 25790.722000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(21893.458000, 25111.335000, 1291.072037, 1291.072037, 0.000000, X, Y) && !ellipse(20799.591858, 26833.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.222076, 28050.306946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.534000, 24768.280000, 1319.328038, 1319.328038, 0.000000, X, Y) && !ellipse(20484.389435, 29722.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19070.132000, 25177.604000, 1456.176042, 1456.176042, 0.000000, X, Y) && !ellipse(19944.700302, 26650.987030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.957367, 26309.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.946000, 25553.939400, 2978.928086, 2978.928086, 0.000000, X, Y) && !ellipse(18750.354000, 25321.626000, 1489.464043, 1489.464043, 0.000000, X, Y) && !ellipse(22003.897000, 24343.916000, 1231.192035, 1231.192035, 0.000000, X, Y) && !ellipse(22469.330320, 25314.032000, 1156.536033, 1156.536033, 0.000000, X, Y) && !ellipse(22217.500000, 30831.026000, 2870.752083, 2870.752083, 0.000000, X, Y) && !ellipse(20529.839554, 28848.225555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20120.471207, 24567.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22369.952000, 24565.976000, 2582.144074, 2582.144074, 0.000000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56.gif
[Wed Jun 13 00:00:57 2012] Mean detx,y = (6145.42, -574.93) 
[Wed Jun 13 00:00:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 00:01:10 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 00:01:11 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Jun 13 00:01:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Wed Jun 13 01:23:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 01:23:55 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:16 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:16 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Wed Jun 13 03:01:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:17 2012] Using photon index=1.80, rate=0.00611, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src56.arf
[Wed Jun 13 03:01:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:17 2012] Updating source flux to 8.9e-14
[Wed Jun 13 03:04:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting