[Tue Jun 12 00:51:24 2012] Detection parameters:
  Position = (236.0, 342.2) = 18 56 23.45 1 19 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.5 +/- 17.7
  Background counts = 109.1
  Rate = 0.006 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 5.53'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Jun 12 06:11:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 9.19"
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jun 12 09:08:01 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src32 appears to have run properly
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jun 12 09:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:35 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 12.545035 pixels away
[Tue Jun 12 09:08:35 2012] Source 48 is offset by 8.271120 and 1.039006 pixels which is larger than
2 X fitted extent = 1.032612 x 1.032612, not incorporating fit results
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 16:05:32 2012] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 9.19"
[Tue Jun 12 16:05:32 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.19"
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29.csv
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29.csv
[Tue Jun 12 20:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jun 12 20:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:47 2012] Warning, spatial fit 29 centroid is now closest to src. 50
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 20:29:47 2012] Source is confused with source 45
[Tue Jun 12 23:38:36 2012] XMMSAS src. selection expression = ellipse(20484.389435, 29722.181549, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48_src.reg
[Tue Jun 12 23:38:36 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (199, 305) - (274, 380)
[Tue Jun 12 23:38:36 2012] XMMSAS bgd. selection expression = annulus(20484.389435, 29722.181549, 1087.500000, 2175.000000, X, Y) && !ellipse(20799.591858, 26833.621185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.222076, 28050.306946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21039.687485, 27503.009827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23031.346000, 31167.856020, 1435.376041, 1435.376041, 0.000000, X, Y) && !ellipse(19459.946000, 25553.939400, 2978.928086, 2978.928086, 0.000000, X, Y) && !ellipse(22149.330800, 33073.803400, 1546.632045, 1546.632045, 0.000000, X, Y) && !ellipse(22217.500000, 30831.026000, 2870.752083, 2870.752083, 0.000000, X, Y) && !ellipse(20529.839554, 28848.225555, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48.gif
[Wed Jun 13 00:01:36 2012] Mean detx,y = (7039.03, 1610.47) 
[Wed Jun 13 00:01:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 00:01:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 00:01:44 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Jun 13 00:01:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Wed Jun 13 01:24:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 01:24:21 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:16 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:16 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Jun 13 03:01:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:17 2012] Using photon index=1.80, rate=0.00599, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src48.arf
[Wed Jun 13 03:01:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:17 2012] Updating source flux to 1.1e-13
[Wed Jun 13 03:04:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting