[Tue Jun 12 00:51:24 2012] Detection parameters:
  Position = (386.9, 376.8) = 18 55 39.68 1 21 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.1 +/- 23.2
  Background counts = 124.4
  Rate = 0.009 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 8.57'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Tue Jun 12 06:11:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.71"
[Tue Jun 12 09:08:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 12 09:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6.csv
[Tue Jun 12 09:08:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 12 09:08:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6.csv
[Tue Jun 12 09:08:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 12 09:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 12 09:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:35 2012] Warning, spatial fit 6 centroid is now closest to src. 24
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:36 2012] Source is confused with source 27
[Tue Jun 12 16:05:32 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Tue Jun 12 16:05:32 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.71"
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5.csv
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 12 20:28:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5.csv
[Tue Jun 12 20:28:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 12 20:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 12 20:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 2644.590000, observed total counts = 2219.000000
[Tue Jun 12 20:29:47 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 1596.200000, observed total counts = 1319.000000
[Tue Jun 12 20:29:47 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 23:38:35 2012] XMMSAS src. selection expression = ellipse(33610.899414, 32736.237183, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 12 23:38:35 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30_src.reg
[Tue Jun 12 23:38:35 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (349, 339) - (424, 414)
[Tue Jun 12 23:38:35 2012] XMMSAS bgd. selection expression = annulus(33610.899414, 32736.237183, 1087.500000, 2175.000000, X, Y) && !ellipse(29299.904000, 35054.306000, 2710.824078, 2710.824078, 0.000000, X, Y) && !ellipse(34228.618530, 32875.565155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30193.870000, 35996.002000, 1733.616050, 1733.616050, 0.000000, X, Y) && !ellipse(30008.836000, 35830.962000, 1708.184049, 1212.600035, 322.219000, X, Y) && !ellipse(33596.758728, 34259.823090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34720.048523, 32588.078583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32776.641418, 33808.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32471.429871, 33029.668365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31979.634400, 31643.626200, 1257.560036, 1257.560036, 3.320000, X, Y) && !ellipse(34849.063200, 31915.959000, 1292.184037, 1292.184037, 0.000000, X, Y) && !ellipse(34335.435669, 33612.006561, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 23:38:35 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30.gif
[Tue Jun 12 23:47:39 2012] Mean detx,y = (-5780.41, 5885.26) 
[Tue Jun 12 23:47:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 23:47:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 23:47:49 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Jun 12 23:47:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 13 00:38:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 00:38:21 2012] rmf not generated due to insufficient counts
[Wed Jun 13 03:01:15 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:15 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 13 03:01:16 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:16 2012] Using photon index=1.80, rate=0.00926, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src30.arf
[Wed Jun 13 03:01:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:16 2012] Updating source flux to 1.5e-13
[Wed Jun 13 03:04:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting