[Tue Jun 12 00:51:23 2012] Detection parameters:
  Position = (363.7, 492.3) = 18 55 46.42 1 29 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 18.6
  Background counts = 80.7
  Rate = 0.003 +/- 0.0007

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 14.83'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Tue Jun 12 06:11:34 2012] source mask rpix=3.2, npix_max = 54, mask sum = 45, frac = 0.830
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 13.84"
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src83.ximg exists
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src83_1.ximg exists
[Tue Jun 12 09:08:01 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src83 appears to have run properly
[Tue Jun 12 09:08:03 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Tue Jun 12 09:08:03 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Tue Jun 12 09:08:03 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Tue Jun 12 09:08:35 2012] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.201913 pixels away
[Tue Jun 12 09:08:35 2012] Warning, spatial fit 83 centroid is now closest to src. 4
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 09:08:36 2012] Source is confused with source 90
[Tue Jun 12 16:05:32 2012] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 13.84"
[Tue Jun 12 16:05:32 2012] source mask rpix=3.2, npix_max = 54, mask sum = 45, frac = 0.830
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 13.84"
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73.csv
[Tue Jun 12 20:28:58 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73_1.ximg exists
[Tue Jun 12 20:28:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73.csv
[Tue Jun 12 20:28:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 20:29:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Tue Jun 12 20:29:00 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Tue Jun 12 20:29:00 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 2414.080000, observed total counts = 2199.000000
[Tue Jun 12 20:29:47 2012] Offset between fit and detection position for source 2 = 3.483734 pixels
[Tue Jun 12 20:29:47 2012] 2233.264000 total counts/ 1813.690000 bgd. counts: snr = 9.852060
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.483734 pixels
  Position = (365.3, 489.2) = 18 55 45.95 1 29 44.4
  Extent = 27.7 (7.1-55.4)", rotation angle = 0
  Source counts = 419.6 +/- 47.3
  Background counts = 1813.7
  Rate = 0.02 +/- 0.002
[Tue Jun 12 20:29:47 2012] Spatial fit model total counts = 7966.560000, observed total counts = 7873.000000
[Tue Jun 12 20:29:47 2012] Offset between fit and detection position for source 2 = 3.354328 pixels
[Tue Jun 12 20:29:47 2012] Warning, changing simple spatial fit ID from 73 to 76
[Tue Jun 12 20:29:47 2012] 7722.582000 total counts/ 6921.200000 bgd. counts: snr = 9.632719
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.354328 pixels
  Position = (367.7, 486.9) = 18 55 45.24 1 29 34.4
  Extent = 51.5 (23.1-103.0)", rotation angle = 0
  Source counts = 801.4 +/- 87.9
  Background counts = 6921.2
  Rate = 0.03 +/- 0.003
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 23:38:38 2012] XMMSAS src. selection expression = ellipse(31942.532000, 42312.690000, 3090.936089, 3090.936089, 0.000000, X, Y)
[Tue Jun 12 23:38:38 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 12 23:38:38 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (190, 309) - (545, 595)
[Tue Jun 12 23:38:38 2012] XMMSAS bgd. selection expression = annulus(31942.532000, 42312.690000, 5151.560148, 10303.120296, X, Y) && !ellipse(29299.904000, 35054.306000, 2710.824078, 2710.824078, 0.000000, X, Y) && !ellipse(33610.899414, 32736.237183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.618530, 32875.565155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32256.226471, 36473.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25738.973846, 31352.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.464000, 37033.145000, 949.800027, 949.800027, 0.000000, X, Y) && !ellipse(27968.962000, 30389.803200, 2706.624078, 2706.624078, 0.000000, X, Y) && !ellipse(26503.452000, 30842.674000, 1377.672040, 1377.672040, 0.000000, X, Y) && !ellipse(30193.870000, 35996.002000, 1733.616050, 1733.616050, 0.000000, X, Y) && !ellipse(30008.836000, 35830.962000, 1708.184049, 1212.600035, 322.219000, X, Y) && !ellipse(28655.514000, 35965.924000, 1453.768042, 1453.768042, 0.000000, X, Y) && !ellipse(33596.758728, 34259.823090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34720.048523, 32588.078583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32776.641418, 33808.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28590.324000, 34790.126000, 733.243221, 733.243221, 0.000000, X, Y) && !ellipse(23031.346000, 31167.856020, 1435.376041, 1435.376041, 0.000000, X, Y) && !ellipse(32471.429871, 33029.668365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.330800, 33073.803400, 1546.632045, 1546.632045, 0.000000, X, Y) && !ellipse(31979.634400, 31643.626200, 1257.560036, 1257.560036, 3.320000, X, Y) && !ellipse(24729.502502, 31472.562714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34849.063200, 31915.959000, 1292.184037, 1292.184037, 0.000000, X, Y) && !ellipse(22217.500000, 30831.026000, 2870.752083, 2870.752083, 0.000000, X, Y) && !ellipse(32086.124054, 42735.579315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30553.829651, 40685.126740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.206000, 40530.690000, 1977.736057, 1977.736057, 0.000000, X, Y) && !ellipse(27319.633400, 39119.926000, 1931.944056, 1931.944056, 0.000000, X, Y) && !ellipse(34335.435669, 33612.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31123.649384, 40242.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.008000, 40306.100000, 3859.040111, 3859.040111, 0.000000, X, Y) && !ellipse(31014.158000, 40556.655000, 2060.624059, 2060.624059, 0.000000, X, Y)
[Tue Jun 12 23:38:38 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 00:19:39 2012] Mean detx,y = (-2750.70, 14545.18) 
[Wed Jun 13 00:19:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 00:20:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 00:20:54 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 00:20:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 03:01:16 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:16 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 03:01:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:17 2012] Using photon index=1.80, rate=0.029, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 03:01:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:17 2012] Updating source flux to 7.1e-13
[Wed Jun 13 03:04:00 2012] Flag c found in src. 2 procflags, skipping spectral fitting