[Tue Jun 12 00:51:24 2012] Detection parameters:
  Position = (343.1, 411.5) = 18 55 52.39 1 24 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.9 +/- 21.3
  Background counts = 164.9
  Rate = 0.006 +/- 0.001

[Tue Jun 12 00:51:25 2012] Off-axis axis estimate = 8.81'
[Tue Jun 12 06:11:34 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:11:34 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Tue Jun 12 06:11:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.838
[Tue Jun 12 06:11:34 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.84"
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27.csv
[Tue Jun 12 09:08:01 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jun 12 09:08:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27.csv
[Tue Jun 12 09:08:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jun 12 09:08:02 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jun 12 09:08:02 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Tue Jun 12 09:08:35 2012] Spatial fit model total counts = 2232.810000, observed total counts = 2231.000000
[Tue Jun 12 09:08:35 2012] Offset between fit and detection position for source 15 = 2.576175 pixels
[Tue Jun 12 09:08:35 2012] Warning, changing simple spatial fit ID from 27 to 24
[Tue Jun 12 09:08:35 2012] 2089.773000 total counts/ 1668.160000 bgd. counts: snr = 10.322744
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.576175 pixels
  Position = (345.5, 412.4) = 18 55 51.69 1 24 10.4
  Extent = 21.4 (21.3-42.7)" x 15.2 (9.4-21.1)", rotation angle = 322 (288-0) degrees
  Source counts = 421.6 +/- 45.7
  Background counts = 1668.2
  Rate = 0.02 +/- 0.002
[Tue Jun 12 09:08:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:36 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:08:36 2012] Source does appear to be extended
[Tue Jun 12 09:08:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Tue Jun 12 09:08:36 2012] Source is confused with source 18
[Tue Jun 12 16:05:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 16:05:32 2012] Initial guess for spatial extent in simple fitting = 18.25"
[Tue Jun 12 16:05:32 2012] source mask rpix=4.2, npix_max = 88, mask sum = 81, frac = 0.918
[Tue Jun 12 16:05:32 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 18.25"
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src24.ximg exists
[Tue Jun 12 20:28:57 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src24_1.ximg exists
[Tue Jun 12 20:28:57 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_src24 appears to have run properly
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Tue Jun 12 20:28:59 2012] fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Tue Jun 12 20:28:59 2012] Fit fullrun_mos2_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Jun 12 20:29:47 2012] Source 15 is offset by 2.234575 and -2.244391 pixels which is larger than
2 X fitted extent = 1.206547 x 1.206547, not incorporating fit results
[Tue Jun 12 20:29:47 2012] Warning, spatial fit 24 centroid is now closest to src. 17
[Tue Jun 12 20:29:47 2012] Source 15 is offset by 8.058529 and 2.979517 pixels which is larger than
2 X fitted extent = 1.053513 x 1.053513, not incorporating fit results
[Tue Jun 12 20:29:47 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:47 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:47 2012] Source does appear to be extended
[Tue Jun 12 20:29:47 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Tue Jun 12 23:38:36 2012] XMMSAS src. selection expression = ellipse(30008.836000, 35830.962000, 1281.138037, 909.450026, 322.219000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing source region out to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15_src.reg
[Tue Jun 12 23:38:36 2012] Extracting stamp from image fullrun_mos2_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (272, 339) - (419, 486)
[Tue Jun 12 23:38:36 2012] XMMSAS bgd. selection expression = annulus(30008.836000, 35830.962000, 2135.230061, 4270.460123, X, Y) && !ellipse(29299.904000, 35054.306000, 2710.824078, 2710.824078, 0.000000, X, Y) && !ellipse(33610.899414, 32736.237183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.618530, 32875.565155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27491.244000, 30455.724000, 1353.312039, 1353.312039, 0.000000, X, Y) && !ellipse(32256.226471, 36473.559967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25738.973846, 31352.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29853.464000, 37033.145000, 949.800027, 949.800027, 0.000000, X, Y) && !ellipse(27968.962000, 30389.803200, 2706.624078, 2706.624078, 0.000000, X, Y) && !ellipse(26503.452000, 30842.674000, 1377.672040, 1377.672040, 0.000000, X, Y) && !ellipse(30193.870000, 35996.002000, 1733.616050, 1733.616050, 0.000000, X, Y) && !ellipse(28655.514000, 35965.924000, 1453.768042, 1453.768042, 0.000000, X, Y) && !ellipse(33596.758728, 34259.823090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34720.048523, 32588.078583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32776.641418, 33808.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28590.324000, 34790.126000, 733.243221, 733.243221, 0.000000, X, Y) && !ellipse(32471.429871, 33029.668365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31979.634400, 31643.626200, 1257.560036, 1257.560036, 3.320000, X, Y) && !ellipse(34849.063200, 31915.959000, 1292.184037, 1292.184037, 0.000000, X, Y) && !ellipse(30553.829651, 40685.126740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26267.206000, 40530.690000, 1977.736057, 1977.736057, 0.000000, X, Y) && !ellipse(27319.633400, 39119.926000, 1931.944056, 1931.944056, 0.000000, X, Y) && !ellipse(34335.435669, 33612.006561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31942.532000, 42312.690000, 4121.248119, 4121.248119, 0.000000, X, Y) && !ellipse(31123.649384, 40242.429810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27489.008000, 40306.100000, 3859.040111, 3859.040111, 0.000000, X, Y) && !ellipse(31014.158000, 40556.655000, 2060.624059, 2060.624059, 0.000000, X, Y)
[Tue Jun 12 23:38:36 2012] Writing fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15.gif
[Wed Jun 13 00:00:06 2012] Mean detx,y = (-1792.77, 8614.95) 
[Wed Jun 13 00:00:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 00:00:17 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 00:00:17 2012] Setting source spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 13 00:00:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Jun 13 03:01:15 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:15 2012] Error reading totcts from fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Jun 13 03:01:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:17 2012] Using photon index=1.80, rate=0.0152, arf fullrun_mos2_xmm0083270401_pi300-10000_pass1_cl_src15.arf
[Wed Jun 13 03:01:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:17 2012] Updating source flux to 2.5e-13
[Wed Jun 13 03:04:00 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Wed Jun 13 03:04:00 2012] Flag c found in src. 15 procflags, skipping spectral fitting