[Tue Jun 12 00:50:53 2012] Detection parameters:
  Position = (326.1, 414.2) = 18 55 57.32 1 24 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.8 +/- 22.3
  Background counts = 190.9
  Rate = 0.006 +/- 0.001

[Tue Jun 12 00:50:54 2012] Off-axis axis estimate = 8.63'
[Tue Jun 12 04:33:01 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 04:33:01 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Tue Jun 12 04:33:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.020
[Tue Jun 12 04:33:01 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.74"
[Tue Jun 12 06:11:33 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11.ximg exists
[Tue Jun 12 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 12 06:11:33 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue Jun 12 06:11:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11.csv
[Tue Jun 12 06:11:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 06:11:34 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue Jun 12 06:11:34 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Jun 12 06:11:34 2012] Fit fullrun_mos1_xmm0083270401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Jun 12 09:08:24 2012] Spatial fit model total counts = 2291.460000, observed total counts = 2286.000000
[Tue Jun 12 09:08:24 2012] Offset between fit and detection position for source 19 = 8.075990 pixels
[Tue Jun 12 09:08:24 2012] 2271.386000 total counts/ 1907.310000 bgd. counts: snr = 8.336455
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 8.075990 pixels
  Position = (320.1, 419.6) = 18 55 59.07 1 24 41.8
  Extent = 21.5 (21.4-43.0)", rotation angle = 0
  Source counts = 364.1 +/- 47.7
  Background counts = 1907.3
  Rate = 0.01 +/- 0.002
[Tue Jun 12 09:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 09:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 09:08:24 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 09:08:24 2012] Source does appear to be extended
[Tue Jun 12 09:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 13:38:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 13:38:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 12 13:38:35 2012] Initial guess for spatial extent in simple fitting = 21.49"
[Tue Jun 12 13:38:35 2012] source mask rpix=4.9, npix_max = 118, mask sum = 121, frac = 1.022
[Tue Jun 12 13:38:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 21.49"
[Tue Jun 12 16:05:30 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jun 12 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11.csv
[Tue Jun 12 16:05:30 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jun 12 16:05:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11.csv
[Tue Jun 12 16:05:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 16:05:31 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jun 12 16:05:31 2012] fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jun 12 16:05:31 2012] Fit fullrun_mos1_xmm0083270401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jun 12 20:29:31 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.088216 pixels away
[Tue Jun 12 20:29:31 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 20:29:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 20:29:31 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 20:29:31 2012] Source does appear to be extended
[Tue Jun 12 20:29:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 22:52:07 2012] XMMSAS src. selection expression = ellipse(27797.022000, 36459.396000, 1289.256037, 1289.256037, 0.000000, X, Y)
[Tue Jun 12 22:52:07 2012] Writing source region out to fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19_src.reg
[Tue Jun 12 22:52:07 2012] Extracting stamp from image fullrun_mos1_xmm0083270401_pi300-10000_cl_sm2.00.img.gz, (246, 346) - (394, 494)
[Tue Jun 12 22:52:07 2012] XMMSAS bgd. selection expression = annulus(27797.022000, 36459.396000, 2148.760062, 4297.520124, X, Y) && !ellipse(29362.467560, 33953.382263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32522.640076, 33680.530212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.885000, 34128.676000, 1651.056048, 1651.056048, 0.000000, X, Y) && !ellipse(28909.764000, 35127.872000, 1649.616047, 1649.616047, 0.000000, X, Y) && !ellipse(32575.321167, 34283.545776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32220.715454, 36440.289795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30410.803223, 40748.210236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30290.394989, 36512.872986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28212.486755, 34945.391479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27803.564453, 40131.789429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.389587, 40058.361938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26866.455933, 40041.664459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30968.372650, 40234.608093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29617.116730, 39957.067261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.190000, 37559.552000, 1373.200040, 417.554412, 119.645438, X, Y) && !ellipse(30616.435242, 41145.394653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31188.490509, 40760.726044, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 22:52:07 2012] Writing fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19.gif
[Tue Jun 12 22:55:38 2012] Mean detx,y = (9217.19, -405.08) 
[Tue Jun 12 22:55:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 22:55:58 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 22:55:58 2012] Setting source spectrum file to fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Tue Jun 12 22:55:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jun 13 03:01:14 2012] Updating aperture counts using extracted products
[Wed Jun 13 03:01:14 2012] Error reading totcts from fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun 13 03:01:14 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 03:01:14 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0083270401_pi300-10000_pass1_cl_src19.arf
[Wed Jun 13 03:01:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 03:01:14 2012] Updating source flux to 1.7e-13