[Tue Jul 10 07:32:05 2012] Detection parameters:
  Position = (230.9, 292.0) = 18 56 24.69 1 15 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.0 +/- 21.2
  Background counts = 82.1
  Rate = 0.03 +/- 0.004

[Tue Jul 10 07:32:05 2012] Off-axis axis estimate = 4.92'
[Tue Jul 10 07:33:52 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:52 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Jul 10 07:33:52 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.159
[Tue Jul 10 07:33:52 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 8.89"
[Tue Jul 10 10:32:05 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56.ximg exists
[Tue Jul 10 10:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56.csv
[Tue Jul 10 10:32:05 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue Jul 10 10:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56.csv
[Tue Jul 10 10:32:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue Jul 10 10:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Jul 10 10:32:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue Jul 10 10:32:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:48 2012] Spatial fit model total counts = 1605.920000, observed total counts = 1344.000000
[Tue Jul 10 12:33:48 2012] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 12:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:48 2012] Assessing source extent using major
[Tue Jul 10 12:33:48 2012] Source does appear to be extended
[Tue Jul 10 12:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:33:48 2012] Source is confused with source 63
[Tue Jul 10 12:34:06 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 12:34:06 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Jul 10 12:34:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.159
[Tue Jul 10 12:34:06 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 8.89"
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46.csv
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46.csv
[Tue Jul 10 15:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 15:38:41 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue Jul 10 15:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Jul 10 15:38:41 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue Jul 10 15:38:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46.csv
[Tue Jul 10 15:38:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 17:08:24 2012] Source 57 is offset by -5.400415 and 0.273615 pixels which is larger than
2 X fitted extent = 1.499182 x 1.032823, not incorporating fit results
[Tue Jul 10 17:08:24 2012] Spatial fit model total counts = 1598.700000, observed total counts = 1344.000000
[Tue Jul 10 17:08:24 2012] Poor agreement between spatial fit and data for source 57
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 17:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:24 2012] Assessing source extent using major
[Tue Jul 10 17:08:24 2012] Source does appear to be extended
[Tue Jul 10 17:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 17:08:43 2012] XMMSAS src. selection expression = ellipse(20036.509888, 25356.458466, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing source region out to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57_src.reg
[Tue Jul 10 17:08:43 2012] Extracting stamp from image fullrun_pn_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (193, 255) - (268, 330)
[Tue Jul 10 17:08:43 2012] XMMSAS bgd. selection expression = annulus(20036.509888, 25356.458466, 1087.500000, 2175.000000, X, Y) && !ellipse(20603.750000, 28078.746000, 2706.112078, 2706.112078, 0.000000, X, Y) && !ellipse(20361.237228, 27263.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.099800, 27151.305800, 1422.768041, 1422.768041, 0.000000, X, Y) && !ellipse(21209.386000, 27034.878000, 1363.056039, 1363.056039, 0.000000, X, Y) && !ellipse(21422.809540, 26566.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20624.201950, 26650.503815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19035.776245, 26130.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20203.479370, 26129.202087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19778.921600, 25966.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22433.422546, 25790.221222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20955.866000, 26067.032000, 1333.288038, 1333.288038, 0.000000, X, Y) && !ellipse(21942.361603, 25703.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.851517, 25019.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19024.752563, 25102.441193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21550.884171, 24580.916443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.760400, 24404.955200, 1414.536041, 612.267218, 7.219000, X, Y) && !ellipse(22835.789581, 24294.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21501.187400, 23769.203600, 1348.544039, 1348.544039, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57.gif
[Tue Jul 10 17:31:00 2012] Mean detx,y = (-6851.35, 2305.99) 
[Tue Jul 10 17:31:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 17:31:15 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 17:31:15 2012] Setting source spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 10 17:31:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jul 10 19:05:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 19:05:22 2012] rmf not generated due to insufficient counts
[Tue Jul 10 19:46:14 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:14 2012] Error reading totcts from fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 10 19:46:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:14 2012] Using photon index=1.80, rate=0.0271, arf fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src57.arf
[Tue Jul 10 19:46:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:14 2012] Updating source flux to 1.1e-13
[Tue Jul 10 19:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting