[Tue Jul 10 07:32:05 2012] Detection parameters:
  Position = (257.5, 309.9) = 18 56 16.95 1 16 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.4 +/- 19.7
  Background counts = 124.4
  Rate = 0.01 +/- 0.003

[Tue Jul 10 07:32:05 2012] Off-axis axis estimate = 3.08'
[Tue Jul 10 07:33:52 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:52 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue Jul 10 07:33:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Tue Jul 10 07:33:52 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.97"
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43.csv
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43.csv
[Tue Jul 10 10:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Jul 10 10:32:06 2012] Fit fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Jul 10 12:33:48 2012] Spatial fit model total counts = 1589.390000, observed total counts = 1583.000000
[Tue Jul 10 12:33:48 2012] Offset between fit and detection position for source 44 = 3.999997 pixels
[Tue Jul 10 12:33:48 2012] 1558.672600 total counts/ 1463.300000 bgd. counts: snr = 2.493199
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.999997 pixels
  Position = (259.2, 313.5) = 18 56 16.47 1 16 54.5
  Extent = 12.3 (5.0-15.9)", rotation angle = 0
  Source counts = 95.4 +/- 39.5
  Background counts = 1463.3
  Rate = 0.01 +/- 0.004
[Tue Jul 10 12:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:48 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 12:33:48 2012] Source does appear to be extended
[Tue Jul 10 12:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:34:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 12:34:06 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Tue Jul 10 12:34:06 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.110
[Tue Jul 10 12:34:06 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.27"
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35.csv
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35.csv
[Tue Jul 10 15:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Jul 10 15:38:40 2012] Fit fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Jul 10 17:08:24 2012] Spatial fit model total counts = 1633.470000, observed total counts = 1592.000000
[Tue Jul 10 17:08:24 2012] Offset between fit and detection position for source 44 = 1.648705 pixels
[Tue Jul 10 17:08:24 2012] 1615.789000 total counts/ 1410.610000 bgd. counts: snr = 5.462978
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.648705 pixels
  Position = (257.8, 312.6) = 18 56 16.87 1 16 50.6
  Extent = 17.8 (7.0-24.5)", rotation angle = 0
  Source counts = 205.2 +/- 40.2
  Background counts = 1410.6
  Rate = 0.02 +/- 0.004
[Tue Jul 10 17:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:24 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 17:08:24 2012] Source does appear to be extended
[Tue Jul 10 17:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 17:08:24 2012] Source is confused with source 33
[Tue Jul 10 17:08:43 2012] XMMSAS src. selection expression = ellipse(22383.099800, 27151.305800, 1067.076031, 1067.076031, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing source region out to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44_src.reg
[Tue Jul 10 17:08:43 2012] Extracting stamp from image fullrun_pn_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (197, 251) - (319, 374)
[Tue Jul 10 17:08:43 2012] XMMSAS bgd. selection expression = annulus(22383.099800, 27151.305800, 1778.460051, 3556.920102, X, Y) && !ellipse(25622.298200, 31335.748200, 1385.856040, 1385.856040, 0.000000, X, Y) && !ellipse(26381.764000, 31170.864000, 1363.392039, 1363.392039, 0.000000, X, Y) && !ellipse(22824.812600, 31026.294400, 734.044021, 734.044021, 0.000000, X, Y) && !ellipse(25887.570526, 30726.839325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.684952, 30746.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.889542, 30139.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.069977, 28959.173920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.824432, 28070.633850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.750000, 28078.746000, 2706.112078, 2706.112078, 0.000000, X, Y) && !ellipse(27012.308200, 27535.884600, 1159.792033, 1159.792033, 0.000000, X, Y) && !ellipse(26043.692540, 27542.519240, 1334.824038, 1010.952029, 359.945000, X, Y) && !ellipse(20361.237228, 27263.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21209.386000, 27034.878000, 1363.056039, 1363.056039, 0.000000, X, Y) && !ellipse(21422.809540, 26566.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20624.201950, 26650.503815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19035.776245, 26130.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20203.479370, 26129.202087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19778.921600, 25966.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22433.422546, 25790.221222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20955.866000, 26067.032000, 1333.288038, 1333.288038, 0.000000, X, Y) && !ellipse(21942.361603, 25703.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20036.509888, 25356.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.851517, 25019.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19024.752563, 25102.441193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21550.884171, 24580.916443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.760400, 24404.955200, 1414.536041, 612.267218, 7.219000, X, Y) && !ellipse(22835.789581, 24294.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21501.187400, 23769.203600, 1348.544039, 1348.544039, 0.000000, X, Y) && !ellipse(24311.104401, 23098.297638, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44.gif
[Tue Jul 10 17:26:43 2012] Mean detx,y = (-4750.58, 500.83) 
[Tue Jul 10 17:26:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 17:27:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 17:27:08 2012] Setting source spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jul 10 17:27:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jul 10 19:46:14 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:14 2012] Error reading totcts from fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jul 10 19:46:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:14 2012] Using photon index=1.80, rate=0.0229, arf fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src44.arf
[Tue Jul 10 19:46:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:14 2012] Updating source flux to 7.4e-14
[Tue Jul 10 19:47:48 2012] Flag c found in src. 44 procflags, skipping spectral fitting