[Tue Jul 10 07:32:05 2012] Detection parameters:
  Position = (320.2, 319.9) = 18 55 58.78 1 17 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.4 +/- 24.6
  Background counts = 171.5
  Rate = 0.02 +/- 0.003

[Tue Jul 10 07:32:05 2012] Off-axis axis estimate = 2.22'
[Tue Jul 10 07:33:52 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:52 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Jul 10 07:33:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Tue Jul 10 07:33:52 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.54"
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35.csv
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35.csv
[Tue Jul 10 10:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Jul 10 10:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Jul 10 10:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Jul 10 10:32:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:48 2012] Warning, spatial fit 35 centroid is now closest to src. 37
[Tue Jul 10 12:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:48 2012] Assessing source extent using major
[Tue Jul 10 12:33:48 2012] Source does appear to be extended
[Tue Jul 10 12:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:34:06 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 12:34:06 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Jul 10 12:34:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Tue Jul 10 12:34:06 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.54"
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29.csv
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29.csv
[Tue Jul 10 15:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jul 10 15:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jul 10 15:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jul 10 15:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 17:08:24 2012] Spatial fit model total counts = 304628.000000, observed total counts = 4559.000000
[Tue Jul 10 17:08:24 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 17:08:24 2012] Warning, spatial fit 29 centroid is now closest to src. 43
[Tue Jul 10 17:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:24 2012] Assessing source extent using major
[Tue Jul 10 17:08:24 2012] Source does appear to be extended
[Tue Jul 10 17:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 17:08:24 2012] Source is confused with source 37
[Tue Jul 10 17:08:43 2012] XMMSAS src. selection expression = ellipse(27808.784241, 27786.949280, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing source region out to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36_src.reg
[Tue Jul 10 17:08:43 2012] Extracting stamp from image fullrun_pn_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (283, 282) - (358, 357)
[Tue Jul 10 17:08:43 2012] XMMSAS bgd. selection expression = annulus(27808.784241, 27786.949280, 1087.500000, 2175.000000, X, Y) && !ellipse(25622.298200, 31335.748200, 1385.856040, 1385.856040, 0.000000, X, Y) && !ellipse(26381.764000, 31170.864000, 1363.392039, 1363.392039, 0.000000, X, Y) && !ellipse(25887.570526, 30726.839325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.655426, 30584.296112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27377.392426, 30410.067780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.664948, 30831.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.069977, 28959.173920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28996.704600, 29245.646000, 1373.768040, 1373.768040, 0.000000, X, Y) && !ellipse(27076.412994, 28878.445099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.870667, 28011.660339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.824432, 28070.633850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28812.895000, 27759.554000, 1139.712033, 1139.712033, 0.000000, X, Y) && !ellipse(27012.308200, 27535.884600, 1159.792033, 1159.792033, 0.000000, X, Y) && !ellipse(26892.359000, 27520.378800, 856.168025, 856.168025, 0.000000, X, Y) && !ellipse(26043.692540, 27542.519240, 1334.824038, 1010.952029, 359.945000, X, Y) && !ellipse(27877.191071, 27125.472626, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36.gif
[Tue Jul 10 17:23:56 2012] Mean detx,y = (728.36, -440.34) 
[Tue Jul 10 17:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 17:24:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 17:24:14 2012] Setting source spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Jul 10 17:24:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Jul 10 18:38:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 10 18:38:33 2012] rmf not generated due to insufficient counts
[Tue Jul 10 19:46:14 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:14 2012] Error reading totcts from fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Jul 10 19:46:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:14 2012] Using photon index=1.80, rate=0.0191, arf fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src36.arf
[Tue Jul 10 19:46:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:14 2012] Updating source flux to 4.8e-14
[Tue Jul 10 19:47:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting