[Tue Jul 10 07:32:05 2012] Detection parameters:
  Position = (231.9, 322.0) = 18 56 24.39 1 17 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 17.8
  Background counts = 86.1
  Rate = 0.02 +/- 0.003

[Tue Jul 10 07:32:05 2012] Off-axis axis estimate = 5.12'
[Tue Jul 10 07:33:52 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:52 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Tue Jul 10 07:33:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.139
[Tue Jul 10 07:33:52 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.99"
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32.csv
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32.csv
[Tue Jul 10 10:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jul 10 10:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 10 10:32:06 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jul 10 10:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 10 10:32:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:48 2012] Spatial fit model total counts = 1202.300000, observed total counts = 1092.000000
[Tue Jul 10 12:33:48 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 12:33:48 2012] Spatial fit model total counts = 1418.720000, observed total counts = 1405.000000
[Tue Jul 10 12:33:48 2012] Offset between fit and detection position for source 33 = 5.011566 pixels
[Tue Jul 10 12:33:48 2012] Warning, changing simple spatial fit ID from 32 to 40
[Tue Jul 10 12:33:48 2012] 1423.667000 total counts/ 1310.930000 bgd. counts: snr = 3.113700
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 5.011566 pixels
  Position = (236.9, 322.6) = 18 56 22.95 1 17 33.9
  Extent = 17.6 (17.6-35.2)", rotation angle = 0
  Source counts = 112.7 +/- 37.7
  Background counts = 1310.9
  Rate = 0.01 +/- 0.004
[Tue Jul 10 12:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:48 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 12:33:48 2012] Source does appear to be extended
[Tue Jul 10 12:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:33:48 2012] Source is confused with source 41
[Tue Jul 10 12:34:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 12:34:06 2012] Initial guess for spatial extent in simple fitting = 17.62"
[Tue Jul 10 12:34:06 2012] source mask rpix=4.1, npix_max = 82, mask sum = 81, frac = 0.978
[Tue Jul 10 12:34:06 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 17.62"
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27.csv
[Tue Jul 10 15:38:39 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27_1.ximg exists
[Tue Jul 10 15:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27.csv
[Tue Jul 10 15:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Tue Jul 10 15:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Tue Jul 10 15:38:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Tue Jul 10 15:38:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 17:08:24 2012] Warning, spatial fit 27 centroid is now closest to src. 41
[Tue Jul 10 17:08:24 2012] Spatial fit model total counts = 3739.460000, observed total counts = 3745.000000
[Tue Jul 10 17:08:24 2012] Offset between fit and detection position for source 33 = 0.874360 pixels
[Tue Jul 10 17:08:24 2012] Warning, changing simple spatial fit ID from 27 to 36
[Tue Jul 10 17:08:24 2012] 3662.466000 total counts/ 2997.010000 bgd. counts: snr = 12.155568
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.874360 pixels
  Position = (237.4, 323.3) = 18 56 22.80 1 17 37.0
  Extent = 33.8 (33.4-34.1)", rotation angle = 0
  Source counts = 665.5 +/- 60.5
  Background counts = 2997.0
  Rate = 0.07 +/- 0.007
[Tue Jul 10 17:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:24 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 17:08:24 2012] Source does appear to be extended
[Tue Jul 10 17:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 17:08:43 2012] XMMSAS src. selection expression = ellipse(20603.750000, 28078.746000, 2029.584058, 2029.584058, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing source region out to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33_src.reg
[Tue Jul 10 17:08:43 2012] Extracting stamp from image fullrun_pn_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (121, 207) - (354, 440)
[Tue Jul 10 17:08:43 2012] XMMSAS bgd. selection expression = annulus(20603.750000, 28078.746000, 3382.640097, 6765.280195, X, Y) && !ellipse(28499.902000, 36027.764000, 1699.888049, 846.216024, 55.405000, X, Y) && !ellipse(21519.846878, 31793.863739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25622.298200, 31335.748200, 1385.856040, 1385.856040, 0.000000, X, Y) && !ellipse(26381.764000, 31170.864000, 1363.392039, 1363.392039, 0.000000, X, Y) && !ellipse(22824.812600, 31026.294400, 734.044021, 734.044021, 0.000000, X, Y) && !ellipse(25887.570526, 30726.839325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.684952, 30746.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.655426, 30584.296112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27377.392426, 30410.067780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.664948, 30831.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20565.889542, 30139.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.069977, 28959.173920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27076.412994, 28878.445099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.870667, 28011.660339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.824432, 28070.633850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.784241, 27786.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27012.308200, 27535.884600, 1159.792033, 1159.792033, 0.000000, X, Y) && !ellipse(26892.359000, 27520.378800, 856.168025, 856.168025, 0.000000, X, Y) && !ellipse(26043.692540, 27542.519240, 1334.824038, 1010.952029, 359.945000, X, Y) && !ellipse(20361.237228, 27263.627075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27877.191071, 27125.472626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.099800, 27151.305800, 1422.768041, 1422.768041, 0.000000, X, Y) && !ellipse(21209.386000, 27034.878000, 1363.056039, 1363.056039, 0.000000, X, Y) && !ellipse(21422.809540, 26566.275665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20624.201950, 26650.503815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19035.776245, 26130.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20203.479370, 26129.202087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19778.921600, 25966.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22433.422546, 25790.221222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20955.866000, 26067.032000, 1333.288038, 1333.288038, 0.000000, X, Y) && !ellipse(21942.361603, 25703.871704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20036.509888, 25356.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22001.851517, 25019.821991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19024.752563, 25102.441193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21550.884171, 24580.916443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20367.760400, 24404.955200, 1414.536041, 612.267218, 7.219000, X, Y) && !ellipse(22835.789581, 24294.685699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21501.187400, 23769.203600, 1348.544039, 1348.544039, 0.000000, X, Y) && !ellipse(24311.104401, 23098.297638, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 17:08:43 2012] Writing fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33.gif
[Tue Jul 10 17:21:29 2012] Mean detx,y = (-6259.81, -119.55) 
[Tue Jul 10 17:21:32 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 17:22:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 17:22:55 2012] Setting source spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 10 17:22:55 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jul 10 19:46:14 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:14 2012] Error reading totcts from fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 10 19:46:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:14 2012] Using photon index=1.80, rate=0.0741, arf fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src33.arf
[Tue Jul 10 19:46:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:14 2012] Updating source flux to 2.4e-13
[Tue Jul 10 19:47:48 2012] Flag p found in src. 33 procflags, skipping spectral fitting
[Tue Jul 10 19:47:48 2012] Flag c found in src. 33 procflags, skipping spectral fitting