[Tue Jul 10 07:32:04 2012] Detection parameters:
  Position = (297.4, 360.0) = 18 56 5.38 1 20 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.8 +/- 24.1
  Background counts = 166.2
  Rate = 0.02 +/- 0.003

[Tue Jul 10 07:32:05 2012] Off-axis axis estimate = 4.47'
[Tue Jul 10 07:33:52 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 07:33:52 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Tue Jul 10 07:33:52 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Tue Jul 10 07:33:52 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.66"
[Tue Jul 10 10:32:03 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 10 10:32:04 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul 10 10:32:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 10 10:32:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 10:32:05 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul 10 10:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jul 10 10:32:05 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul 10 10:32:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Jul 10 10:32:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:48 2012] Warning, spatial fit 15 centroid is now closest to src. 17
[Tue Jul 10 12:33:48 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:48 2012] Assessing source extent using major
[Tue Jul 10 12:33:48 2012] Source does appear to be extended
[Tue Jul 10 12:33:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:33:48 2012] Source is confused with source 17
[Tue Jul 10 12:33:48 2012] Source is confused with source 19
[Tue Jul 10 12:34:06 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 12:34:06 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Tue Jul 10 12:34:06 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.007
[Tue Jul 10 12:34:06 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 8.66"
[Tue Jul 10 15:38:38 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul 10 15:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12.csv
[Tue Jul 10 15:38:38 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul 10 15:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12.csv
[Tue Jul 10 15:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul 10 15:38:40 2012] fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul 10 15:38:40 2012] Fit fullrun_pn_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jul 10 17:08:24 2012] Spatial fit model total counts = 2400.170000, observed total counts = 2271.000000
[Tue Jul 10 17:08:24 2012] Offset between fit and detection position for source 15 = 2.467693 pixels
[Tue Jul 10 17:08:24 2012] 2337.545000 total counts/ 1966.710000 bgd. counts: snr = 8.362008
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 2.467693 pixels
  Position = (295.1, 360.7) = 18 56 6.07 1 20 19.8
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source counts = 370.8 +/- 48.3
  Background counts = 1966.7
  Rate = 0.04 +/- 0.005
[Tue Jul 10 17:08:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:24 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 17:08:24 2012] Source does appear to be extended
[Tue Jul 10 17:08:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 17:08:42 2012] XMMSAS src. selection expression = ellipse(25622.298200, 31335.748200, 1039.392030, 1039.392030, 0.000000, X, Y)
[Tue Jul 10 17:08:42 2012] Writing source region out to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15_src.reg
[Tue Jul 10 17:08:42 2012] Extracting stamp from image fullrun_pn_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (235, 301) - (355, 420)
[Tue Jul 10 17:08:42 2012] XMMSAS bgd. selection expression = annulus(25622.298200, 31335.748200, 1732.320050, 3464.640100, X, Y) && !ellipse(28499.902000, 36027.764000, 1699.888049, 846.216024, 55.405000, X, Y) && !ellipse(29378.802600, 35234.672000, 1723.120050, 1723.120050, 0.000000, X, Y) && !ellipse(28658.082977, 34572.251007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.846878, 31793.863739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26381.764000, 31170.864000, 1363.392039, 1363.392039, 0.000000, X, Y) && !ellipse(22824.812600, 31026.294400, 734.044021, 734.044021, 0.000000, X, Y) && !ellipse(25887.570526, 30726.839325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22027.684952, 30746.268829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28003.655426, 30584.296112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27377.392426, 30410.067780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.664948, 30831.800598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26357.069977, 28959.173920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28996.704600, 29245.646000, 1373.768040, 1373.768040, 0.000000, X, Y) && !ellipse(27076.412994, 28878.445099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26875.870667, 28011.660339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25900.824432, 28070.633850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20603.750000, 28078.746000, 2706.112078, 2706.112078, 0.000000, X, Y) && !ellipse(28812.895000, 27759.554000, 1139.712033, 1139.712033, 0.000000, X, Y) && !ellipse(27808.784241, 27786.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27012.308200, 27535.884600, 1159.792033, 1159.792033, 0.000000, X, Y) && !ellipse(26892.359000, 27520.378800, 856.168025, 856.168025, 0.000000, X, Y) && !ellipse(26043.692540, 27542.519240, 1334.824038, 1010.952029, 359.945000, X, Y) && !ellipse(27877.191071, 27125.472626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22383.099800, 27151.305800, 1422.768041, 1422.768041, 0.000000, X, Y) && !ellipse(21209.386000, 27034.878000, 1363.056039, 1363.056039, 0.000000, X, Y)
[Tue Jul 10 17:08:42 2012] Writing fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15.gif
[Tue Jul 10 17:14:25 2012] Mean detx,y = (-1379.71, -3900.42) 
[Tue Jul 10 17:14:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 17:14:49 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 17:14:49 2012] Setting source spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jul 10 17:14:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Jul 10 19:46:13 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:13 2012] Error reading totcts from fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Jul 10 19:46:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:14 2012] Using photon index=1.80, rate=0.0413, arf fullrun_pn_xmm0083270301_pi300-10000_pass1_cl_src15.arf
[Tue Jul 10 19:46:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:14 2012] Updating source flux to 1.3e-13
[Tue Jul 10 19:47:48 2012] Flag c found in src. 15 procflags, skipping spectral fitting