[Tue Jul 10 07:32:39 2012] Detection parameters:
  Position = (245.8, 298.8) = 18 56 20.37 1 15 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.4 +/- 17.1
  Background counts = 52.5
  Rate = 0.01 +/- 0.002

[Tue Jul 10 07:32:39 2012] Off-axis axis estimate = 3.82'
[Tue Jul 10 11:29:19 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 11:29:19 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Tue Jul 10 11:29:19 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.070
[Tue Jul 10 11:29:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.34"
[Tue Jul 10 12:33:33 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 12:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 12:33:33 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 12:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 12:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:33 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 12:33:33 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 12:33:33 2012] Fit fullrun_mos2_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 10 12:33:55 2012] Spatial fit model total counts = 971.336000, observed total counts = 967.000000
[Tue Jul 10 12:33:55 2012] Offset between fit and detection position for source 3 = 1.589281 pixels
[Tue Jul 10 12:33:55 2012] 922.148000 total counts/ 712.734000 bgd. counts: snr = 7.844079
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.589281 pixels
  Position = (247.1, 297.9) = 18 56 19.98 1 15 46.7
  Extent = 16.7 (16.6-33.4)", rotation angle = 0
  Source counts = 209.4 +/- 30.4
  Background counts = 712.7
  Rate = 0.02 +/- 0.003
[Tue Jul 10 12:33:55 2012] Spatial fit model total counts = 994.448000, observed total counts = 995.000000
[Tue Jul 10 12:33:55 2012] Offset between fit and detection position for source 3 = 0.647778 pixels
[Tue Jul 10 12:33:55 2012] Warning, changing simple spatial fit ID from 1 to 18
[Tue Jul 10 12:33:55 2012] 982.726900 total counts/ 911.095000 bgd. counts: snr = 2.373147
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.647778 pixels
  Position = (246.8, 298.5) = 18 56 20.07 1 15 49.1
  Extent = 9.0 (-12.3-8.8)", rotation angle = 0
  Source counts = 71.6 +/- 31.3
  Background counts = 911.1
  Rate = 0.006 +/- 0.003
[Tue Jul 10 12:33:55 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:55 2012] Assessing source extent using major
[Tue Jul 10 12:33:55 2012] Source does appear to be extended
[Tue Jul 10 12:33:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:33:55 2012] Source is confused with source 26
[Tue Jul 10 16:31:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 16:31:48 2012] Initial guess for spatial extent in simple fitting = 9.04"
[Tue Jul 10 16:31:48 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.940
[Tue Jul 10 16:31:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.04"
[Tue Jul 10 17:08:10 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 17:08:10 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 17:08:10 2012] Fit fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Jul 10 17:08:10 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 17:08:10 2012] fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 17:08:10 2012] Fit fullrun_mos2_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 17:08:32 2012] Spatial fit model total counts = 1080.660000, observed total counts = 1078.000000
[Tue Jul 10 17:08:32 2012] Offset between fit and detection position for source 3 = 0.632403 pixels
[Tue Jul 10 17:08:32 2012] 1019.660000 total counts/ 783.237000 bgd. counts: snr = 8.447790
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.632403 pixels
  Position = (246.3, 298.1) = 18 56 20.21 1 15 47.3
  Extent = 18.1 (18.1-18.1)", rotation angle = 0
  Source counts = 236.4 +/- 31.9
  Background counts = 783.2
  Rate = 0.02 +/- 0.003
[Tue Jul 10 17:08:32 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:32 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 17:08:32 2012] Source does appear to be extended
[Tue Jul 10 17:08:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 19:23:25 2012] XMMSAS src. selection expression = ellipse(21381.706740, 25885.226800, 1084.398031, 1084.398031, 0.000000, X, Y)
[Tue Jul 10 19:23:25 2012] Writing source region out to fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jul 10 19:23:25 2012] Extracting stamp from image fullrun_mos2_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (184, 236) - (309, 360)
[Tue Jul 10 19:23:25 2012] XMMSAS bgd. selection expression = annulus(21381.706740, 25885.226800, 1807.330052, 3614.660104, X, Y) && !ellipse(20287.140671, 24596.188171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19314.048400, 25631.264000, 1460.408042, 1460.408042, 0.000000, X, Y) && !ellipse(20622.348740, 26048.890106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20984.111084, 25019.049377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20168.042694, 25706.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19992.610306, 26256.516052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20934.475311, 27508.970367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21727.448929, 25460.076294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22511.538818, 23805.732849, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 19:23:25 2012] Writing fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3.gif
[Tue Jul 10 19:23:53 2012] Mean detx,y = (5670.33, -1959.58) 
[Tue Jul 10 19:23:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 19:24:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 19:24:11 2012] Setting source spectrum file to fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 10 19:24:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jul 10 19:46:15 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:15 2012] Error reading totcts from fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 10 19:46:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:15 2012] Using photon index=1.80, rate=0.0214, arf fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3.arf
[Tue Jul 10 19:46:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:15 2012] Updating source flux to 2.7e-13
[Tue Jul 10 19:46:40 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Jul 10 19:47:48 2012] Reading fit data from xmm0083270301/analysis//spectral/fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jul 10 19:47:48 2012] Spectral fit parameter nH value = 1.52881e+22
[Tue Jul 10 19:47:48 2012] Spectral fit parameter PhoIndex value = 6.42044
[Tue Jul 10 19:47:48 2012] Failed to get F(0.3-8.0) from xmm0083270301/analysis//spectral/fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 19:47:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:47:48 2012] Using Nh = 1.5e+22, photon index=6.42, rate=0.0214, arf fullrun_mos2_xmm0083270301_pi300-10000_pass1_cl_src3.arf
[Tue Jul 10 19:47:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:47:48 2012] Updating source flux to 1.7e-13