[Tue Jul 10 07:32:22 2012] Detection parameters:
  Position = (398.7, 369.2) = 18 55 36.01 1 20 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 11.8
  Background counts = 21.5
  Rate = 0.008 +/- 0.002

[Tue Jul 10 07:32:22 2012] Off-axis axis estimate = 8.90'
[Tue Jul 10 10:32:07 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 10:32:07 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Tue Jul 10 10:32:07 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 1.000
[Tue Jul 10 10:32:07 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.88"
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14.csv
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14.csv
[Tue Jul 10 11:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul 10 11:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:51 2012] Warning, spatial fit 14 centroid is now closest to src. 12
[Tue Jul 10 12:33:51 2012] Source 13 is offset by 7.969767 and -2.489217 pixels which is larger than
2 X fitted extent = 1.287885 x 1.287885, not incorporating fit results
[Tue Jul 10 12:33:51 2012] Spatial fit model total counts = 411.959000, observed total counts = 399.000000
[Tue Jul 10 12:33:51 2012] Offset between fit and detection position for source 13 = 0.150171 pixels
[Tue Jul 10 12:33:51 2012] Warning, changing simple spatial fit ID from 14 to 19
[Tue Jul 10 12:33:51 2012] 406.852200 total counts/ 374.055000 bgd. counts: snr = 1.695778
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.150171 pixels
  Position = (398.8, 369.3) = 18 55 35.98 1 20 57.0
  Extent = 7.3 (2.7-21.6)", rotation angle = 0
  Source counts = 32.8 +/- 20.2
  Background counts = 374.1
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability